Products
- Terminal Board
- Isolated Safety Barriers
- Signal Isolators
- Surge Protective Devices
- Safety Relays
- Isolated Intelligent I/O Modules
- Intelligent Gateways
- Industrial Data Optical Transceivers
- Online Dew Point Analyzers
- Data Acquisition Modules
- HART data converter
PHC-11TF-14
PHC-11TF-14 1 input 1 output
Input: Switch contacts, logic levels
Output: 12V/45mA driver
PHD-11TP-13
PHD-11TP-13 1 input 1 output
Frequency 1:1 output (Provided power 12V)
PHD-11TT-*1
PHD-11TT-*1 1 input 1 output
TC input/ 4-20mA output (configurable)
PH-200 Online Dew Point Analyzer
1.The signal control unit and the sampling measurement unit are installed separately to overcome the dust,high temperature and acid corrosion problems of high temperature smoke,so that it can measure the moisture in high temperature stably online for a long time.
2.Adopt the new generation foreign sensors,the measurement accuracy is much more higher.
3.Equipped with automatic calibration function, which can greatly reduce the deviation that may occur in the dry end of the dew point measurement.
Equipped with sensor heating function,which can improve the performance of sensor in high humidity and freezing environments without interfering its measured output value
PH6403-3A1B Intelligent safety relay
Overview
PH6403-3A1B is a safety relay control module suitable for two wire safety mats inputs, with 3 normally open (NO) safety output contacts and 1 normally closed (NC) auxiliary output contact for safety relays. It supports manual or automatic reset and has a reset button monitoring function.
PHG-12TE series
Input: 2 wire, 3 wire transmitter or current source signals
Output: DC signal(current/voltage)
1 input 2 outputs
PHL-TX24-P3-*-EX Field Instrument Surge Pr...
Product overview
Intrinsically safe explosion-proof certification suitable for protection of 2-wire, 3-wire and 4-wire transmitter, TC, RTD, RS485, RS232, RS422, flow meter, electromagnetic valve etc.
Network Signal Surge Protective Devices
Standard BNC coaxial interface is used for lightning protection of SD coaxial video surveillance system.
PHL-T5-L2-EX
Intrinsically Safe Surge Protective Devices with 5V Voltage System
PH-TY series RS422 bus data optical transc...
Product overview
PH-Co series product is an industrial ControlNet data optical transceiver, which supports rate 5Mbps, standard BNC connector compatible with ControlNet data interface, support single optical port/dual optical port chain network and ControlNet protocol. 35mmDIN, DC 9-30V power supply. PH-Co supports two cascadable upstream and downstream optical fiber interfaces, one data interface, ZD-Co supports one optical fiber interface and one data interface.
PHM-7730 Ex. Three-channel temperature qua...
Product overview
This device excels in converting three-channel temperature signals within hazardous areas into digital signals, ensuring isolation for safety purposes. By adhering to the MODBUS RTU protocol, it seamlessly delivers these digital signals to compatible systems such as the PHM7100, PLC, or host computer systems. This ensures efficient and secure communication of critical temperature data, enabling effective monitoring and control in industrial environments.