Anolog Input
- Terminal Board
- Isolated Safety Barriers
- Signal Isolators
- Surge Protective Devices
- Safety Relays
- Isolated Intelligent I/O Modules
- Intelligent Gateways
- Industrial Data Optical Transceivers
- Online Dew Point Analyzers
- Data Acquisition Modules
- HART data converter
PHG-12TE series
Overview
DC signal input with provided power, single input, dual DC signal output.
The parameters of output can be customized according to the requirements of customers.
Supply power 24 VDC.
In the "Common models and parameters" the number "8" means "customizable".
| Input | |
| Input signal | Two or three-wire system 4~20mA or current source signal |
| Distribution voltage | ≥18V |
| Input resistance | ≤100Ω |
| Output | |
| Output signal | DC signal(current/voltage) |
| Load Resistance | Current load resistance ≤500Ω Voltage load resistance <5mA |
| Basic parameters | |
| Supply voltage | 20~35V DC |
| Power consumption | Current output<1.3W, voltage output<1W(PHG-11TE series) Current output<1.8W, voltage output<1W(PHG-12TE series) |
| LED indicator | Green: power indicator |
| Output accuracy | 0.1%F.S (Typical value: 0.05%F.S) |
| Response time | 5ms to reach 90% of the final value |
| Temperature parameters | Working temperature: -20℃ ~ +60℃, Storage temperature: -40℃ ~ +80℃ |
| Relative humidity | 10%~95% RH no condensation |
| Insulation strength | ≥2000VAC/min (input/output/power supply) |
| Insulation resistance | 100MΩ (500V DC) (between input/output/power supply) |
| Electromagnetic compatibility | GB/T 18268 (IEC 61326-1) |
| MTBF | 80000h |
| Wire requirements | Cross section≥ 0.5mm2; Insulation strength ≥ 500V |
| Applicable field equipments | Two or three-wire transmitter or current source |
PHD-11TC-33A-23
PHG-12TE series