Not Intrinsically Safe Isolated I/O Modules
- Terminal Board
- Isolated Safety Barriers
- Signal Isolators
- Surge Protective Devices
- Safety Relays
- Isolated Intelligent I/O Modules
- Intelligent Gateways
- Industrial Data Optical Transceivers
- Online Dew Point Analyzers
- Data Acquisition Modules
- HART data converter
PHM-7540 Four-channel analog input module
Product Advantages
■ Awide range of inputs such as Al、AO、 D|、 DO、 TC、RTD can be provided
■ Compare with traditional PLC+isolated safety barrier, it can avoid the failure through twice signal conversion, increase the transmission accuracy and system stability
■ With DIN rail bus power supply and communication, flexible and convenient
■ High module/channel densities, efficiently save space and cost
Technical indicators
Power supply |
24VD |
Input signal |
2-wire, 3-wire or 4~20mA |
Input channel |
4 channels |
Communication interface |
RS48 |
Accuracy |
0.10% |
Communication protocol |
MODBUS |
Response time |
≤10ms |
Temperature drift |
0.005% F.S /℃ |
Configuration mode |
PC programmab |
Electromagnetic compatibility |
IEC 6132 |
Isolation ability |
1500VAC |
Working temperature |
-20℃~+60℃ |
Storage temperature |
-40℃~+85℃ |
Ambient humidity |
≤95%ARH Non-condensation |
Protection level |
IP20 |
product display
✤Low power consumption design, low temperature drift, automatic zero calibration.
✤Totally isolated between four channel input signals/communication/power supply
✤Support hot-plug
✤The MODBUS RTU communication protocol is supported, and the communication rate is as high as 115200bps.
✤Support power supply and communication in two ways: backplane mounting rail and terminal.
✤Combined used with PHM-7100 to support MODBUS TCP/IP, so that to simplify the installation and maintenance, and to improve the data transmission performance.
