Industrial Data Optical Transceivers
- Terminal Board
- Isolated Safety Barriers
- Signal Isolators
- Surge Protective Devices
- Safety Relays
- Isolated Intelligent I/O Modules
- Intelligent Gateways
- Industrial Data Optical Transceivers
- Online Dew Point Analyzers
- Data Acquisition Modules
- HART data converter
PH-D series data optical transceiver
Product features
◑ Support Device Net industrial control fieldbus protocol
◑ It adopts standard industrial 35mm DIN rail installation Method
◑ Communication rate 0-500K self-adaptation
◑ The electric interface has the isolation functions with 1500V voltage and 600W surge protection
◑ It adopts DC9-30V wide power input, dual power redundancy, DC1000V power isolation and reverse connection protection, which meets the requirements of various industrial sites requirements. It can provide relay output optical fiber and power failure alarm
Electrical interface
◕ Support DeviceNet protocol
◕ Maximal communication rate 500K
◕ 5 PIN interface terminal
◕ Isolation voltage: with 1500V isolation voltage and 600W surge protection function
Optical fiber interface
◐ Fiber wavelength: multimode: 850nm, 1310nm；singlemode: 1310nm, 1550nm
◐ Optical fiber interface type: SC, ST and FC are optional;standard: SC interface
◐ Transmission optical fiber:multimode: 50/125, 62.5/125, 100/140um singlemode: 8.3/125, 9/125um, 10/125um
◐ Transmission distance: multimode 2KM; single mode: 20KM
Other indicators
◒ Power supply: support dual power redundant input, DC9-30V, typical DC24V, power consumption less than 1.5W
◒ Dimensions: 136mm×105mm×52mm
◒ Relative humidity: ≤90% (no condensation)
◒ Optical fiber link failure and power failure alarm relay output; contact maximum capacity: DC48V/1A, industrial terminal interface
◒ Working temperature: -10-70℃(-40~+85℃ optional)
◒ storage temperature: -40~80℃
product display
Product Display
