Industrial Data Optical Transceivers
- Terminal Board
- Makabukud a Safety Barriers
- Signal Isolators
- Surge Protective Devices
- Safety Relays
- Isolated Intelligent I/O Modules
- Intelligent Gateways
- Industrial Data Optical Transceivers
- Online Dew Point Analyzers
- Data Acquisition Modules
- HART data converter
PH-D series data optical transceiver
Tampok ning produktu
◑Suportan ing Device Net industrial control fieldbus protocol
◑Gagamitan ne ing standard industrial 35mm DIN rail installation Kabukud
◑Communication rate 0-500K self-adaptation
◑Ing electric interface atin yang isolation functions kareng 1500V voltage ampo 600W surge protection
◑Gagamit yang DC9-30V wide power input, dual power redundancy, DC1000V power isolation ampo reverse proteksyun keng koneksyun, na makatupad kareng requirements kareng miyayaliwang industrial sites requirements. Malyari yang mamye relay output optical fiber ampo power failure alarm
Electrical interface
◕ Suportan ing DeviceNet protocol
◕ Maximal communication rate 500K
◕ 5 PIN interface terminal
◕ Isolation voltage: atin yang 1500V isolation voltage ampo 600W surge protection function
Optical fiber interface
◐ Fiber wavelength:multimode: 850nm, 1310nm；singlemode: 1310nm, 1550nm
◐ Optical fiber interface type: SC, ST ampo FC optional la; standard: SC interface
◐ Transmission optical fiber:multimode: 50/125, 62.5/125, 100/140um singlemode: 8.3/125, 9/125um, 10/125um
◐ Distansya ning pamaglipat: multimode 2KM; single mode: 20KM
Deng aliwang indicators
◒ Suplay ning kuryenti: suportan ing dual power redundant input, DC9-30V, tipikal a DC24V, mas mababa ya ing power consumption kesa keng 1.5W
◒ Sukat:136mm×105mm×52mm
◒ Relatibong humidity: ≤90% (ala yang condensation)
◒ Optical fiber link failure ampo power failure alarm relay output; contact maximum capacity: DC48V/1A, industrial terminal interface
◒ Temperatura ning obra: -10-70°C(-40~+85°C optional)
◒ temperatura ning pamitipun: -40~80°C
produktu display
Palabas ning Produktu
