Industrial Data Optical Transceivers
- Terminal Board
- Makabukud a Safety Barriers
- Signal Isolators
- Surge Protective Devices
- Safety Relays
- Isolated Intelligent I/O Modules
- Intelligent Gateways
- Industrial Data Optical Transceivers
- Online Dew Point Analyzers
- Data Acquisition Modules
- HART data converter
PH-S series S908 RIO bus optical transceiver
Tampok ning produktu
◑Suportan ing S908 RIO industrial control fieldbus protocol.Ing rate ning komunikasyun 1.544M yang adaptive
◑Ing interface gagamit yang standard BNC-F head coaxialinterface, compatible keng S908 data interface
◑Ing pekamalating optical fiber communication distance malyari yangmiras 60KM
◑Ing electric interface atin yang isolation functions kareng1500V voltage ampo 600W surge protection
◑Gagamitan ne ing standard industrial 35mm DIN rail installationkabukud
◑Gagamit yang DC9-30V wide power input, dual powerredundancy, DC1000V power isolation ampo reverseproteksyun keng koneksyun, na makatupad kareng requirementskareng miyayaliwang industrial sites requirements. Malyari yang mamyerelay output optical fiber ampo power failure alarm
Electrical interface
◕ Suportan ing S908 RIO bus protocol
◕ Communication rate 1. 544 Mbps
◕Standard F-head coaxial interface compatible ya keng S908data connector
◕Isolation voltage: atin yang 1500V isolation voltage ampo600W surge protection function
◕Termination resistor: Ing produktung ayni ala yang terminationresistor, pero malyari yang ikonekta kaya nungkailangan
Optical fiber interface
◐ Fiber wavelength: multimode: 850nm, 1310nm; singlemode: 1310nm, 1550nm
◐ Optical fiber interface type: SC, ST ampo FC optional la;standard: SC interface.
◐ Transmission optical fiber: multimode: 50/125, 62.5/125, 100/140um single mode: 8.3/125, 9/125um, 10/125um
◐ Distansya ning pamaglipat: multimode 2KM; single mode: 20KM
Deng aliwang indicators
◒ Suplay ning kuryenti: suportan ing dual power redundant input,DC9-30V, tipikal DC24V, mas ditak ing pamangailangan kuryenti1.5W
◒ Makipag ugnayan keng pekamaragul a kapasidad: DC48V/1A, industrial terminal interface
◒Optical fiber link failure ampo power failure alarm relayoutput
◒ Sukat: 136mm×105mm×52mm
◒ Temperatura ning obra: -10-70°C(-40~+85°C optional)
◒ Relative humidity: ≤90% (ala yang condensation);
◒ temperatura ning pamitipun: -40~80°C