Industrial Data Optical Transceivers
- Terminal Board
- Isolated Safety Barriers
- Signal Isolators
- Surge Protective Devices
- Safety Relays
- Isolated Intelligent I/O Modules
- Intelligent Gateways
- Industrial Data Optical Transceivers
- Online Dew Point Analyzers
- Data Acquisition Modules
- HART data converter
PH-C series CAN bus data optical transceiver
Product features
◑ Support CAN2.0A/B industrial control fieldbus protocol
◑ Single optical port / dual optical port chain network support
◑ The electric interface has the isolation functions with 1500V voltage and 600W surge protection
◑ It adopts standard industrial 35mm guide rail installation method
◑ Communication rate 0-500K self-adaptation
◑ CAN2. OA/B field bus 5PIN industrial terminal wiring
◑ It adopts DC9-30V wide power input, dual power redundancy, DC1000V power isolation and reverse connection protection, which meets the requirements of various industrial sites requirements. It can provide relay output optical fiber and power failure alarm
Electrical interface
◕ CAN2. 0A/B field bus
◕ Support: 500K
◕ 5 PIN interface terminal
◕ Isolation voltage: instantaneous isolation voltage 5000V; continuous isolation voltage 1000V
Optical fiber interface
◐ Fiber wavelength: multimode: 850nm, 1310nm; singlemode: 1310nm, 1550nm
◐ Optical fiber interface type: SC, ST and FC are optional;standard: SC interface
◐ Transmission optical fiber: multimode: 50/125, 62.5/125, 100/140um single mode: 8.3/125, 9/125um, 10/125um
◐ Transmission distance: multimode 2KM; single mode: 20KM
Other indicators
◒ Power supply: support dual power redundant input, DC9-30V, typical DC24V, power consumption less than 1.5W
◒ Contact maximum capacity : DC48V/1A, industrial terminal interface
◒ Optical fiber link failure and power failure alarm relay output
◒ Dimensions: 125mmX90mm(with clamp rail 100mm) X50mm
◒ Working temperature: -10-70℃(-40~+85℃ optional)
◒ Relative humidity: ≤90% (no condensation);
◒ storage temperature: -40~80℃