PHG-14TD Series

Input: 2 wire, 3 wire transmitter or DC signal
Output: DC signal(current/voltage)

1 input 4 outputs

product details

Technical parameter

Wiring diagram

Certification

Download

Overview

Analog input signal isolator, can isolate and convert two or three wire 4-20mA or DC signals into current or voltage signals for output. Input and output parameters can be customized according to user needs. This product requires independent power supply, with isolated power supply, input, and output terminals.

Input
Input signal	2 wire, 3 wire 4-20mA or DC signal (current/voltage)
Input resistance	Voltage type ≥100kΩ Current type ≤100Ω
Output
Output signal	DC signal(current/voltage)
Load Resistance	Current load resistance ≤500Ω Voltage load resistance <5mA
Basic parameters
Supply voltage	20~35VDC
Power consumption	Current output<2.2W; Voltage output<1W (PHG-13TD series) Current output<2.6W; Voltage output<1W (PHG-14TD series)
LED indicator	Green: power indicator
Output accuracy	0.1%FS (Typical value: 0.05%F.S)
Response time	5ms to reach 90% of the final value
Temperature parameters	Working temperature: -20℃ ~ +60℃, Storage temperature: -40℃ ~ +80℃
Relative humidity	10%~95% RH no condensation
Insulation strength	≥2000VAC/min (input/output/power supply)
Insulation resistance	100MΩ (500V DC) (between input/output/power supply)
Electromagnetic compatibility	GB/T 18268 (IEC 61326-1)
MTBF	80000h
Wire requirements	cross section ≥ 0.5mm2; Insulation strength ≥ 500V
Applicable field equipments	2 wire, 3 wire transmitters or current and voltage sources