H Series Backplane Mounting Isolated Safety Barriers
- Terminal Board
- Makabukud a Safety Barriers
- Signal Isolators
- Surge Protective Devices
- Safety Relays
- Isolated Intelligent I/O Modules
- Intelligent Gateways
- Industrial Data Optical Transceivers
- Online Dew Point Analyzers
- Data Acquisition Modules
- HART data converter
PHC-11HD-11
Overview
H series backplane mounting isolated safety barriers at operating side: PHC-11HD-11, input ampo output a maki analog, metung a input ampo metung a output.
Ing safety barrier malyari yang magtransmit keng 4~20mA signal ibat keng ligtas a lugal papunta keng delikadung lugal, para i-drive ing valve positioner, electric/gas converters ampo reng aliwang actuators para magobra la.
Ing produktung ini mangailangan yang independenting power supply.
Terminal isolation pilatan ning power supply, input ampo output.
| Supply voltage | 20~35VDC, power consumption mga 1.2W (nung 24 VDC, output 20mA) |
| Input signal | 4~20mA (HART) |
| Output signal | 4~20mA (HART) |
| paintulutan a kapasidad ning karga ning output | 0~800 Ω |
| Katuliran ning pamaglual | 0.1%FS (Typical value: 0.05%FS) |
| Ing pamagbayu ning temperatura | 0.005%FS/°C |
| Channel number ning input ampo output | 1 input 1 output |
| Applicable field equipments | Valve positioner, electric/pneumatic converter |
| Parameters ning temperatura | Temperatura ning obra: -20°C~+60°C, temperatura ning pamitipun: -40°C~+80°C |
| Relatibung humidity | 10%~95% RH alang condensation |
| Dielectric strength | pilatan ning intrinsically safe side ampo non-intrinsically safe side (≥3000VAC/min); pilatan ning suplay ning kuryenti ampo ing e ligtas a terminal (≥1500VAC/min) |
| Insulation resistance | ≥100MΩ (pilatan ning input/output/power supply) |
| Panlual a sukad | Kapal 15.8mm * lapad 104.8mm * katas 116.1mm |
| Electromagnetic compatibility | Agpang keng IEC 61326-1 (GB/T 18268), IEC 61326-3-1 |
| Markang e malyaring sabog | [Exia Ga]IIC, [Exia Da]IIIC |
| Sertipikasyun ning kaligtasan a pang-obra | SIL2 agpang keng IEC 61508 EN 61511 standards |
| katawan ning sertipikasyun | CQST (China National Quality Supervision and Test Center for Explosion Protected Electrical Products) |
| Certified parameters (pilatan da reng terminal 2-1) | Um=250V Uo=28V Io=93mA Po=0.65W Co=0.083μF Lo=4.2mH |
| Kailangan king lugal ning pamag-install | Malyari yang ikonekta kareng instrumentu keng 0 zone a maki IIA, IIB, IIC delikadung gas |
| MTBF | ≤100000h |
PHC-11HD-11
PHC-11HD-11