H Series Backplane Go hloma Mapheko a Polokego a Arotšwego
- Boto ya Terminal
- Mapheko a Polokego ao a Arotšwego
- Di-Isolator tša Matshwao
- Didirišwa tša Tšhireletšo ya Surge
- Di-Relay tša Polokego
- Dimojule tša I/O tša Bohlale tše di Ikemetšego
- Dikgoro tše Bohlale
- Di-Transceiver tša Optical tša Datha ya Intasteri
- Ditshekatsheko tša Ntlha ya Phoka tša Inthaneteng
- Dimojule tša go Hwetša Datha
- HART ya data sefetoledi
01.02.03.04.05.
PHC-11HD-11
Kakaretšo
H serie backplane ntseng bo eketseha arotsoe polokeho mapheko ka lehlakoreng la ho sebetsa: PHC-11HD-11, input le dipholo tsa analoge, input e le 'ngoe le dipholo tsa e le 'ngoe.
Lepheko la polokeho le ka fetisetsa pontšo ea 4 ~ 20mA ho tloha sebakeng se bolokehileng ho ea sebakeng se kotsi, ho khanna positioner ea belofo, converters motlakase / khase le actuators tse ling ho sebetsa.
Setšweletšwa se se hloka phepelo ya mohlagase ye e ikemetšego.
Theminali ikarola pakeng tsa phepelo matla, input le dipholo tsa.
| Phepelo gagamalo | 20 ~ 35VDC, tshebediso ya matla ka 1.2W (ha 24 VDC, dipholo tsa 20mA) |
| Input pontšo | 4 ~ 20mA (HART) . |
| Output pontšo | 4 ~ 20mA (HART) . |
| Allowable dipholo tsa mojaro bokgoni | 0 ~ 800 Ω |
| Go nepagala ga ditšweletšwa | 0.1% FS (Boleng bjo bo tlwaelegilego: 0.05% FS) . |
| Thempheretšha ya go kgeloga | 0.005% FS / ° C |
| Channel palo ya input le dipholo tsa | 1 input 1 dipholo tsa |
| Didirišwa tša tšhemo tše di šomago | Valve positioner, motlakase / moea converter |
| Ditekanyetšo tša themperetšha | Mocheso o sebetsa: -20 ° C ~ + 60 ° C, polokelo mocheso: -40 ° C ~ + 80 ° C |
| Monola wa go lekana | 10% ~ 95% RH ha ho condensation |
| Matla a dielectric | Magareng ga lehlakore leo le bolokegilego ka tlhago le lehlakore leo e sego la bolokegilego ka tlhago (≥3000VAC/min); pakeng tsa phepelo matla le bao e seng ka hare bolokehileng terminal (≥1500VAC / mets) |
| Kganetšo ya go thibela go fiša | ≥100MΩ (pareng input / dipholo tsa / phepelo matla) |
| Ditekanyo tša ka ntle | Botenya 15.8mm * bophara 104.8mm * phahameng 116.1mm |
| Go sepelelana ga mohlagase wa makenete | Go ya ka IEC 61326-1 (GB / T 18268), IEC 61326-3-1 |
| Letshwao la go thuthupa | [Exia Ga]IIC, [Exia Da]IIIC |
| Setifikeiti sa polokego ya mošomo | SIL2 go ya ka maemo a IEC 61508 EN 61511 |
| Sehlopha sa setifikeiti | CQST (China National Boleng Tlhokomelo le Teko Center bakeng sa Thuthupa Sireleditsweng Motlakase Dihlahiswa) |
| Ditekanyetos setifikeiti (gare ga ditheminali 2-1) . | Um = 250V Uo = 28 V Io = 93 mA Po = 0.65W Co = 0.083 μF Lo = 4,2 mH |
| Dinyakwa tša lefelo la go hloma | E ka amana le diletswa ka 0 zone le IIA, IIB, IIC khase kotsi |
| MTBF | ≤100000h e 100000h |
PHC-11HD-11
PHC-11HD-11