Ihe Mgbochi Nchekwa Kewapụrụ Iche nke H Series Backplane
- Ọdụ ụgbọ okporo ígwè
- Ihe Mgbochi Nchekwa Ndị Kewapụrụ Iche
- Ndị Na-egbochi Mgbaàmà
- Ngwaọrụ Nchedo Elu
- Nchekwa Relays
- Modulu I/O nke nwere ọgụgụ isi dịpụrụ adịpụ
- Ọnụ Ụzọ Amamihe
- Ndị na-ebufe ihe nlele anya nke ụlọ ọrụ mmepụta ihe
- Ndị Nyocha Dew Point Ntanetị
- Modulu Nnweta Data
- Ihe Ntụgharị data HART
PHC-11HD-11
Nchịkọta
Ihe mgbochi nchekwa nke usoro H nke na-etinye ihe mgbochi nchekwa dịpụrụ adịpụ n'akụkụ ọrụ: PHC-11HD-11, ntinye na mmepụta nwere analog, ntinye otu na mmepụta otu.
Ihe mgbochi nchekwa nwere ike ibufe akara 4 ~ 20mA site na ebe nchekwa gaa na ebe dị ize ndụ, iji chụpụ ihe nkwụnye valvụ, ihe mgbanwe eletriki/gas na ihe ndị ọzọ na-eme ka ihe rụọ ọrụ.
Ngwaahịa a chọrọ ike eletrik nke onwe ya.
Nkwụsị njedebe n'etiti ọkọnọ ike, ntinye na mmepụta.
| Voltaji ọkọnọ | 20~35VDC, oriri ike dị ihe dịka 1.2W (mgbe 24 VDC, mmepụta 20mA) |
| Mgbaàmà ntinye | 4~20mA (HART) |
| Mgbaàmà mmepụta | 4~20mA (HART) |
| Ike ibu ọrụ mmepụta a na-anabata | 0~800 Ω |
| Izi ezi nke mmepụta | 0.1%FS (Uru nkịtị: 0.05%FS) |
| Mbugharị okpomọkụ | 0.005%FS/℃ |
| Ọnụọgụ ọwa nke ntinye na mmepụta | Ntinye 1 1 mmepụta |
| Ngwa ubi dị mkpa | Ihe na-eme ka valvụ dị, ihe na-agbanwe ọkụ eletrik/pneumatic |
| Paramita okpomọkụ | Okpomọkụ ọrụ: -20℃~+60℃, okpomọkụ nchekwa: -40℃~+80℃ |
| Iru mmiri dị nso | 10% ~ 95% RH enweghị mmiri ozuzo |
| Ike Dielectric | N'etiti akụkụ nchekwa dị n'ime na akụkụ nchekwa na-abụghị nke dị n'ime (≥3000VAC/min); n'etiti ọkụ eletrik na ọdụ nchekwa na-abụghị nke dị n'ime (≥1500VAC/min) |
| Mgbochi mkpuchi | ≥100MΩ (n'etiti ntinye/mmepụta/ọkụ) |
| Akụkụ mpụta | Ọkpụrụkpụ 15.8mm * obosara 104.8mm * elu 116.1mm |
| Ndakọrịta elektrọnik | Dịka IEC 61326-1 (GB/T 18268) si kwuo, IEC 61326-3-1 |
| Akara mgbochi mgbawa | [Exia Ga]IIC, [Exia Da]IIC |
| Asambodo nchekwa ọrụ | SIL2 dịka ọkọlọtọ IEC 61508 EN 61511 si dị |
| Ahụ asambodo | CQST (Ụlọ Ọrụ Nlekọta na Nnwale nke Mba China maka Ngwaahịa Eletriki Echekwara Mgbawa) |
| Paịtima ndị a kwadoro (n'etiti njedebe 2-1) | Um=250V Uo=28V Io=93mA Po=0.65W Co=0.083μF Lo=4.2mH |
| Ihe achọrọ maka ebe nrụnye | Enwere ike ijikọ ya na ngwa egwu dị na mpaghara 0 yana gas dị ize ndụ ⅡA, ⅡB, ⅡC |
| MTBF | ≤100000h |
PHC-11HD-11
PHC-11HD-11