H Series Backplane Mounting ah hian himna tur a awm a
- Terminal Board-ah hian a awm a
- Hriselna atana harsatna awmte
- Signal Isolators te pawh a awm
- Surge laka invenna hmanrua te
- Safety Relay te a awm bawk
- Intelligent I/O Module hrang hrang awmte
- Gateways fing tak tak te
- Industrial Data Optical Transceiver hmanga siam a ni
- Online hmanga Dew Point thlirletna
- Data lakkhawmna Modules te
- HART data converter a ni
01 a ni02 a ni03 a ni04 a ni05 a ni
PHC-11HD-11 hmanga siam a ni
A tlangpuiin
H serie backplane mounting isolated safety barriers at operating side: PHC-11HD-11, input leh output ah analog, single input leh single output a awm.
Safety barrier hian 4~20mA signal chu safe area atanga hmun hlauhawm takah a thawn thei a, chu chuan valve positioner, electric/gas converter leh actuator dangte chu hnathawh tir turin a khalh thei a ni.
He product hian independent power supply a mamawh a ni.
Power supply, input leh output inkara terminal isolation a awm.
| Supply voltage a awm | 20~35VDC, power consumption 1.2W vel (24 VDC a nih chuan, output 20mA) |
| Signal input a ni | 4~20mA (HART) a ni. |
| A chhuahna signal a ni | 4~20mA (HART) a ni. |
| Output load theihna phalsak a ni | 0~800 Ω a ni |
| Output dik tak a ni | 0.1%FS (A hlutna tlangpui: 0.05%FS) a ni. |
| Temperature a inthlak danglam thin | 0.005%FS/°C a ni |
| Channel number ah input leh output a awm | 1 input 1 output a ni |
| Field hmanrua hman tur | Valve dahna tur, electric/pneumatic converter hmanga siam a ni |
| Temperature parameter hrang hrangte | A hnathawhna hmun: -20°C~+60°C, a dahna hmun: -40°C~+80°C |
| Relative humidity a awm lo | 10%~95% RH ah chuan condensation a awm lo |
| Dielectric chakna a ni | Intrinsically safe side leh non-intrinsically safe side (≥3000VAC/min) inkar; power supply leh non-intrinsically safe terminal (≥1500VAC/min) inkar a ni. |
| Insulation a do theih loh | ≥100MΩ (input/output/power supply inkar) a ni. |
| Pawn lam dimensions te | A thuk zawng 15.8mm * a zau zawng 104.8mm * a san zawng 116.1mm |
| Electromagnetic nena inmil theihna | IEC 61326-1 (GB/T 18268) ang chuan IEC 61326-3-1 |
| Puak thei lo chhinchhiahna | A rilru a hah lutuk chuan a rilru a buai em em a |
| Functional safety certification pek a ni | SIL2 chu IEC 61508 EN 61511 standard angin a ni |
| Certification siamtu pawl a ni | CQST (China National Quality Supervision leh Test Centre for Explosion Protected Electrical Products) a ni a, a hmunah hian mipui an pungkhawm nasa hle. |
| Certified parameters (terminal 2-1 inkar) 1.1. | Um=250V Uo=28V Io=93mA Po=0.65W Co=0.083μF Lo=4.2mH |
| Installation site mamawh a ni | 0 zone-a instrument-te nen IIA, IIB, IIC gas hlauhawm tak nen a inzawm thei a ni |
| MTBF | ≤100000h a ni |
PHC-11HD-11 hmanga siam a ni
PHC-11HD-11 hmanga siam a ni