PHC-11HD-11

4~20mA input/4~20mA output
H Serie Backplane Mounting Isolated Safety Barriers
1 input 1 output

Wec kudwa

lembe ikum piny

Piny ma pire tek

Cal pa waya

Certification

Telo

Neno wi lembe

H series backplane mounting isolated safety barriers at operating side: PHC-11HD-11, input and output with analog, single input and single output.

Jam gwoko kwo copo cwalu 4~20mA signal kud kama ber ni kama rac, mi telu valve positioner, electric/gas converters man actuators mukende ni tic.

Piny eni mitu kero ma tiye kende.

Terminal isolation ikind mac ma wok, ma donjo man ma wok woko.

Voltage mi mio	20~35VDC, tiyo ku mac ma romo 1.2W (ka 24 VDC, wok 20mA)
Lanyuth mi ketho	4~20mA (HART)
Lanyuth mawok	4~20mA (HART)
Kero mi tingo piny ma juyiyu	0~800 Ω
Ber pa adwogi	0.1%FS (Typical value: 0.05%FS)
Lokruok pa lyethu	0.005%FS/°C
Namba mi yore mi ketho man mi wok woko	1 input 1 output
Jam tic mi poto ma tiyo	Valve positioner, mac/pneumatic converter
Piny ma mako lyethu	Lyethu mi tic: -20°C~+60°C, lyethu mi kano piny: -40°C~+80°C
Piny ma ngic	10%~95% RH epe ku pii
Teko pa dielectric	Ikind thenge ma ber man thenge ma ber ongo (≥3000VAC/min); ikind kero pa mac ku terminal ma ber ongo (≥1500VAC/min)
Teko pa lyethu	≥100MΩ (ikind piny ma wok/wok woko/miyo kero)
Kite ma woko	Lar 15.8mm * lac 104.8mm * bor 116.1mm
Ber pa mac	Ni lubre ku IEC 61326-1 (GB/T 18268), IEC 61326-3-1
Lanyuth ma jwigere ngo	[Exia Ga]IIC, [Exia Da]IIIC
Karatasi mi gwoko leng pa tic	SIL2 nimakere ku cik pa IEC 61508 EN 61511
Ju ma miyo certificate	CQST (China National Quality Supervision and Test Center for Explosion Protected Electrical Products)
Lembe ma juyiko (i kind terminal 2-1)	Um=250V Uo=28V Io=93mA Po=0.65W Co=0.083μF Lo=4.2mH
Piny ma mitere i kabedo mi ketho piny	Ecopu bedu ku jam tic i 0 zone ku ⅡA, ⅡB, ⅡC gas ma rac
MTBF	≤100000h

PHC-11HD-11

PHC-11HD-11