Analog Input Isolation Conversion Redundant Board PHFD-16RAI

Number of channels: 16

Signal type: dual line analog input (temperature, voltage/current), three terminal isolation

Supporting isolation barrier: MTL5500 series single channel analog safety barrier, P+F、 Pinghe Analog Input 1 in 2 out Rail Grid (12.8mm)

Installation form: M4.8 self tapping or M4 screw fixation

Supporting card components:

S7-300PLC: 6ES7 331-1KF02 \ 7KF02 \ 7NF00 \ 7NF10, etc.

This product does not support the 7KF02 loop power supply mode (range card D).

Common configurations:

Single channel 1 in 2 out analog input isolation gate: MTL5544D/5576

P+F、 Pinghe single channel analog input 1 in 2 out rail grid (12.8mm)

Power supply and DB port power settings:

This product is designed for redundant

power supply and comes with a power loss alarm output

DB1 port contains a 4-core power cord for supplying power to the PLC module. These power supplies are controlled by short-circuit caps set by the power output, with each short-circuit cap corresponding to a wire, as shown in the upper right figure. Before power transmission, settings should be made as needed.
Parameter