PHD-11TP-11M PHD-12TP-111M

antre dan landrwa danzere

Kalite sinyal

1) trwa difil PNP/NPN sanser antre:
Distribisyon sanser:(2+、15、3-):14V,
Kouran:
Frekans antre: 0.1Hz~100kHz

2) Frekans sinyal antre:
Frekans antre:0.1Hz~100kHz
voltaz maksimonm ki ganny permet: 30Vp-p
Nivo antre minimonm: 0.2V(2Hz~100kHz)
                                       2V(0.1Hz~100kHz)

3) Switch proksimite, antre switch kontak sek:
voltaz distribisyon:(4+、5-)≈8V,kouran kourt-sirkwi:(4+、5-)>7mA
Frekans antre :0.1Hz~100kHz

sorti dan landrwa an sekirite

sinyal sorti

0~20mA、4~20mA、0~5V、0~10V

rezistans load sorti kouran

rezistans load sorti voltaz

≥300Ω

bann paramet debaz

fournitir kouran

20~35V DC

konsomasyon kouran

≤85mA(24V power supply, 20mA output)

larzer lenpilsyon

≥2μs

presizyon sorti

0.1% FS

tanperatir i sanze

0.01% FS/°C

Pour detay lo fonksyon deteksyon fot sinyal antre, refer avek mannyel aplikab

letan repons relay

20ms

tanperatir travay

-20°C~+60°C

tanperatir stokaz

-40°C~+80°C

limidite relatif

10%~95%RH (napa kondansasyon)

EMC

dapre GB/T 18268(IEC 61326-1)

lafors izolasyon

ant kote intrinsikman an sekirite e kote non-intrinsikman an sekirite≥2500V AC/min
ant kouran ek kote non-intrinsikman an sekirite ≥2500V AC/min

rezistans izolasyon

≥100MΩ(ant antre/sorti/power supply)

legzizans difil

Seksyon transversal ≥0.5mm2; Lafors ensilyasyon ≥500V

Landrwa lenstalasyon

enstale dan en zonn an sekirite, i kapab ganny konekte avek bann lenstriman sekirite intrinsik dan bann landrwa danzere ziska zonn 0, IIC, zonn 20, e IIIC

lekipman aplikab lo teren

dapre DIN19234 NAMUR switch proksimite, switch kontak sek eksetera bann laparey teren (enkli switch presyon intinsik, switch tanperatir e switch nivo likid eksetera), sinyal lenpilsyon nivo, sorti sanser PNP/NPN trwa difil, encoder enkrwasan

sertifikasyon sekirite

Mark anti-eksplozyon

[Exia Ga] IIC [Exia From] IIIC

standar anti-eksplozyon

GB/T 3836.1-2021, GB/T 3836.4-2021

terminal 4-5

Um=250VAC/DC,Uo=10.5VDC,Io=14mA,
Po=37mW,Co=2.4μF,Lo=165mH

terminal 3-6

Um=250VAC/DC,Uo=14VDC,Io=8mA,
Po=28mW,Co=0.73μF,Lo=150mH

terminal 1-2-3

Um=250VAC/DC,Uo=17.5VDC,Io=330mA,
Po=1.4W,Co=0.375μF,Lo=0.22mH

Lenstitisyon sertifikasyon

Lenstiti lenstriman ek teste Shanghai pour lenstriman ek sistenm otomatik (SITIIAS)