PHD-11TP-11M PHD-12TP-111M

Keth piny i kabedu ma rac

Kit lanyuth

1) waya adek PNP/NPN sensor input:
Poko pa piny:(2+、15、3-):14V,
Kawoni:
Frequency mi ketho: 0.1Hz~100kHz

2) Frequency signal input:
Frequency mi donjo:0.1Hz~100kHz
Voltage ma dit ma juyiyu: 30Vp-p
Kabedo ma nok: 0.2V(2Hz~100kHz)
                                       2V(0.1Hz~100kHz)

3) Proximity switch, dry contact switch input:
Voltage mi poko:(4+、5-)≈8V,Short-circuit current:(4+、5-)>7mA
Frequency mi donjo:0.1Hz~100kHz

Wok i kabedu maber

Lanyuth mawok

0~20mA、4~20mA、0~5V、0~10V

Current output load resistance

Voltage ma wok kud i peko

≥300Ω

Piny ma pire tek

Mio mac

20~35V DC

Tiyu ku mac

≤85mA(24V power supply, 20mA output)

Lat pa Impulse

≥2μs

Ber pa adwogi

0.1% FS

Lokruok pa lyethu

0.01% FS/°C

Pi ngec matuc ikum tic mi nyang ikum lembe ma rac, nen buku ma tiyo kudu

Saa mi dwoko wang lembe

20ms

Liet pa tic

-20°C~+60°C

lyethu mi gwoko piny

-40°C~+80°C

Piny ma ngic

10%~95%RH (no condensation)

EMC

Nimakere ku GB/T 18268(IEC 61326-1)

Teko mi gwoko piny

Ikind thenge ma ber man thenge ma ber ungo≥2500V AC/min
Ikind kero pa mac man thenge ma ber ≥2500V AC/min

Teko pa lyethu

≥100MΩ(ikind piny ma wok/wok woko/mio teko)

Piny ma mitere pi waya

The cross-section ≥0.5mm2; Insulation strength ≥500V

Kabedo mi ketho

Ka juketho i kabedo ma ber, ecopu bedu ku jam tic mi gwoko kwo i kabedo ma rac nitundu i Zone 0, IIC, Zone 20, man IIIC

Jam tic mi poto ma tiyo

Ni lubre ku DIN19234 NAMUR proximity switch, dry contact switch etc. field devices (include intinsic pressure switch, temperature switch and liquid level switch etc.), level impulse signal, three wire PNP/NPN sensor output, incremental encoder

Karatasi mi gwoko kwo

Lanyuth ma jwigere ngo

[Exia Ga] IIC [Exia From] IIIC

Kite ma jwigere ku lyethu

GB/T 3836.1-2021, GB/T 3836.4-2021

Terminals 4-5

Um=250VAC/DC,Uo=10.5VDC,Io=14mA,
Po=37mW,Co=2.4μF,Lo=165mH

Terminal 3-6

Um=250VAC/DC,Uo=14VDC,Io=8mA,
Po=28mW,Co=0.73μF,Lo=150mH

Terminals 1-2-3

Um=250VAC/DC,Uo=17.5VDC,Io=330mA,
Po=1.4W,Co=0.375μF,Lo=0.22mH

Ju ma miyo certificate

Shanghai Inspection and Testing Institute of Instruments and Automation Systems (SITIIAS)