PHD-11TP-11M PHD-12TP-111M

Tihnung hmun ah luhternak

Signal phun

1) hri pathum PNP/NPN sensor luhternak:
Sensor phawtzamhnak:(2+、15、3-):14V,
Atu:
Luhternak frequency: 0.1Hz~100kHz

2) Frequency signal luhternak:
Luhternak frequency:0.1Hz~100kHz
A tam bik luhter khawhmi thazaang: 30Vp-p
A tlawmbik luhternak: 0.2V(2Hz~100kHz)
                                       2V(0.1Hz~100kHz)

3) Naih tein umnak thlennak, a ro cangmi pehtlaihnak thlennak luhternak:
Phawtzamhnak voltage:(4+、5-)≈8V,Short-circuit current:(4+、5-)>7mA
Luhternak frequency :0.1Hz~100kHz

A himnak hmun ah chuah

Chuahmi signal

0~20mA、4~20mA、0~5V、0~10V

Atu lio chuahmi thilrit doh khawhnak

Voltage chuahmi thilrit doh khawhnak

≥300Ω

A hrampi parameters

Thazaang peknak

20~35V DC

Thazaang hmannak

≤85mA(24V thazaang peknak, 20mA chuahnak)

Impulse kauhnak

≥2μs

Chuahmi a dikthliar

0.1% FS

Khuacaan thlennak

0.01% FS/°C

Input signal palhnak hmuh khawhnak riantuannak konglam hngalh na duh ahcun, aa pehtlaimi cauk kha zoh

Relay lehnak caan

20ms

Riantuannak lumnak

-20°C~+60°C

chiahnak lumternak

-40°C~+80°C

Aa pehtlaimi lumternak

10%~95%RH (condensation a um lo)

EMC

GB/T 18268(IEC 61326-1) ning in

Insulation thazaang

A chunglei in a himmi lei le a him lomi lei karlak≥2500V AC/min
Thazaang peknak le a him lomi lei ≥2500V AC/min karlak ah

Insulation doh khawhnak

≥100MΩ(luhnak/chuahnak/mei thazaang peknak karlak)

Wire herhmi

Cross-section ≥0.5mm2;Insualtion thazaang ≥500V

Chiahnak hmun

A himnak hmun ah chiah ahcun, Zone 0, IIC, Zone 20, le IIIC tiang tihnung hmun ah a chunglei himnak thilri hna he pehtlaih khawh a si

Hman khawhmi lo thilri hna

DIN19234 NAMUR naihnak thlennak, a ro cangmi pehtlaihnak thlennak tbk. field thilri (intinsic pressure thlennak, lumternak thlennak le ti tluknak thlennak tbk. aa telmi) ningin, tlukruannak thlennak signal, wire pathum PNP/NPN sensor chuahmi, incremental encoder

Himnak hngalhternak

A puak kho lomi hmelchunhnak

[Exia Ga] IIC [Exia From] IIIC

Puak kho lomi phunglam

GB/T 3836.1-2021, GB/T 3836.4-2021

Terminal 4-5

Um=250VAC/DC,Uo=10.5VDC,Io=14mA,
Po=37mW,Co=2.4μF,Lo=165mH

Terminal 3-6

Um=250VAC/DC,Uo=14VDC,Io=8mA,
Po=28mW,Co=0.73μF,Lo=150mH

Terminal 1-2-3

Um=250VAC/DC,Uo=17.5VDC,Io=330mA,
Po=1.4W,Co=0.375μF,Lo=0.22mH

Fehternak bu

Shanghai Inspection and Testing Institute of Instruments and Automation Systems (SITIIAS)