- Tashar Jiragen Sama
- Shingayen Tsaro da Aka Keɓe
- Masu Rarraba Sigina
- Na'urorin Kariya Masu Tasowa
- Tsaron jigilar kaya
- Modules na I/O masu Hankali da Aka Raba
- Ƙofofin Wayo Masu Hankali
- Masu Canja wurin Bayanan Masana'antu
- Masu Nazarin Dew Point na Kan layi
- Sassan Samun Bayanai
- Mai canza bayanai na HART
PHG-12TZ-466+
Bayani
Mai canza zafin shigar da thermistor tare da aikin kariyar ƙaruwa zai iya canza siginar Pt100 na waya biyu da thermistors na waya uku (RTDs) zuwa siginar 1: 1 na thermistor. Ana iya tsara shi cikin hikima, kuma ana iya saita ainihin kewayon juriyar zafi ta hanyar software na kwamfuta.
Wannan samfurin yana buƙatar samar da wutar lantarki mai zaman kanta, tare da samar da wutar lantarki mai zaman kanta, shigarwa, da tashoshin fitarwa.
Bayani dalla-dalla
| Shigarwa | |
| Siginar shigarwa | Waya biyu ko waya uku siginar Pt100 |
| Kewayon aunawa | -150℃-850℃ |
| Fitarwa: | |
| Siginar fitarwa | Siginar RTD Pt100 |
| Iyakar kaya | Ƙarfin kaya 0-500 Ω (ana iya keɓancewa) |
| Fasali na kariyar karuwa: | |
| Nau'in wutar lantarki mai fitarwa ln(8/20μs) | 5kA ku |
| Matsayin kariyar wutar lantarki Sama (8/20μs): | 60V (layi zuwa layi) |
| Matsayin kariyar wutar lantarki Sama (8/20μs): | 600V (layi zuwa ƙasa) |
| Dangane da ƙa'idodi | GB/T18802.21-2016(daidai da 1EC61643-21:2012) |
| Ƙarfin wutar lantarki | 20-35VDC |
| Amfani da wutar lantarki | |
| Alamar LED | Kore: Alamar wuta Ƙararrawa ta gajeren da'ira: Hasken ja na ALM yana aiki na dogon lokaci Ƙararrawa ta buɗewa: Hasken ALM ja yana walƙiya |
| Daidaiton fitarwa | 0.1%FS |
| Juyawar yanayin zafi | 0.1%FS/10℃ |
| Sigogin zafin jiki | Zafin aiki: -20℃~+60℃, zafin ajiya: -40℃~+80℃ |
| Danshin da ya dace | 10% ~ 95% RH babu danshi |
| Ƙarfin rufin | ≥2000VAC/min (tsakanin shigarwa/fitarwa/ samar da wutar lantarki) |
| Juriyar rufi | ≥100MΩ (tsakanin shigarwa/fitarwa/ samar da wutar lantarki) |
| Dacewar na'urar lantarki | A cewar IEC 61326-1(GB/T 18268), IEC 61326-3-1 |
| MTBF | 800000h |
| Bukatun waya | Ƙungiyoyin da suka haɗu ≥ 0.5mm²; Ƙarfin rufin ≥ 500V |
| Kayan aikin filin da suka dace | Wayoyi biyu ko waya uku RTD Pt100 |
Girma
Tsarin zane
Lura:
1. Aikin layin wutar lantarki aiki ne na zaɓi, kuma masu amfani suna buƙatar ƙayyade hanyar samar da wutar lantarki lokacin yin oda.
Zaɓin haɗin layin wutar lantarki zai iya komawa zuwa shafi na 89 na "Annex"
2. Lokacin shigar da wayar RTD guda uku, ya zama dole a tabbatar da cewa wayoyi uku suna da tsayi iri ɗaya gwargwadon iko
3. Lokacin shigar da RTD mai waya biyu, dole ne tashoshin shingen tsaro 5 da 6 su kasance gajeru a kewaye.
