- Tashar Jiragen Sama
- Shingayen Tsaro da Aka Keɓe
- Masu Rarraba Sigina
- Na'urorin Kariya Masu Tasowa
- Tsaron jigilar kaya
- Modules na I/O masu Hankali da Aka Raba
- Ƙofofin Wayo Masu Hankali
- Masu Canja wurin Bayanan Masana'antu
- Masu Nazarin Dew Point na Kan layi
- Sassan Samun Bayanai
- Mai canza bayanai na HART
PHG-11TZ-46+
Bayani
Mai canza zafin shigar da zafin jiki na resistor tare da aikin kariyar karuwa zai iya watsa siginar resistor mai waya biyu ko uku (RTD) Pt100 da fitarwa a cikin 1: 1, don fitar da kaya.
Wannan samfurin yana buƙatar samar da wutar lantarki mai zaman kanta, tare da samar da wutar lantarki mai zaman kanta, shigarwa, da tashoshin fitarwa.
Bayani dalla-dalla
| Shigarwa | |
| Siginar shigarwa | Waya biyu ko waya uku siginar Pt100 |
| Kewayen sigina | Tsarin aunawa mai dacewa na juriyar zafi |
| Kewayon aunawa | -150℃-850℃ |
| Fitarwa: | |
| Siginar fitarwa | Siginar RTD Pt100 |
| Wutar lantarki | 0.1-3mA |
| Fasali na kariyar karuwa: | |
| Nau'in wutar lantarki mai fitarwa ln(8/20μs) | 5kA ku |
| Matsayin kariyar wutar lantarki Sama (8/20μs): | 60V (layi zuwa layi) |
| Matsayin kariyar wutar lantarki Sama (8/20μs): | 600V (layi zuwa ƙasa) |
| Dangane da ƙa'idodi | GB/T18802.21-2016(daidai da 1EC61643-21:2012) |
| Ƙarfin wutar lantarki | 20-35VDC |
| Amfani da wutar lantarki | |
| Alamar LED | Kore: Alamar wuta |
| Daidaiton fitarwa | 0.1%FS |
| Juyawar yanayin zafi | 0.1%FS/10℃ |
| Sigogin zafin jiki | Zafin aiki: -20℃~+60℃, zafin ajiya: -40℃~+80℃ |
| Danshin da ya dace | 10% ~ 95% RH babu danshi |
| Ƙarfin rufin | ≥2000VAC/min (tsakanin shigarwa/fitarwa/ samar da wutar lantarki) |
| Juriyar rufi | ≥100MΩ (tsakanin shigarwa/fitarwa/ samar da wutar lantarki) |
| Dacewar na'urar lantarki | A cewar IEC 61326-1(GB/T 18268), IEC 61326-3-1 |
| MTBF | 100000h |
| Bukatun waya | Sashe na giciye ≥ 0.5mm2; Ƙarfin rufi ≥ 500V |
| Kayan aikin filin da suka dace | Wayoyi biyu ko waya uku RTD Pt100 |
Girma
Tsarin zane
Lura:
1. Aikin layin wutar lantarki aiki ne na zaɓi, kuma masu amfani suna buƙatar ƙayyade hanyar samar da wutar lantarki lokacin yin oda.
Zaɓin haɗin layin wutar lantarki zai iya komawa zuwa shafi na 89 na "Annex"
2. Lokacin shigar da wayar RTD guda uku, ya zama dole a tabbatar da cewa wayoyi uku suna da tsayi iri ɗaya gwargwadon iko
3. Lokacin shigar da na'urar RTD mai waya biyu, dole ne a yi amfani da tashoshin shingen tsaro 4 da 2 a takaice.
