- Terminal Board-ah hian a awm a
- Hriselna atana harsatna awmte
- Signal Isolators te pawh a awm
- Surge laka invenna hmanrua te
- Safety Relay te a awm bawk
- Intelligent I/O Module hrang hrang awmte
- Gateways fing tak tak te
- Industrial Data Optical Transceiver hmanga siam a ni
- Online hmanga Dew Point thlirletna
- Data lakkhawmna Modules te
- HART data converter a ni
PHG-11TZ-46+ hmanga siam a ni
A tlangpuiin
Thermal resistor input temperature converter hian surge protection function a nei a, wire pahnih emaw wire thum emaw thermal resistor (RTD)Pt100 signal chu a thawn chhuak thei a, 1: 1-ah a chhuak thei a, load chu a khalh thei a ni.
He product hian independent power supply a mamawh a, power supply, input leh output terminal hrang hrang a awm bawk.
A chiang zawk
| Input a ni | |
| Signal input a ni | Wire pahnih emaw wire thum emaw Pt100 signal |
| Signal awmna hmun a ni | Thermal resistance tehna range inmil |
| A tehna range | -150°C-850°C inkar a ni |
| A chhuah dan: 1.1. | |
| A chhuahna signal a ni | RTD Pt100 signal a ni |
| Excitation current a awm bawk | 0.1-3mA inkar a ni |
| Surge laka invenna features te chu: | |
| A chhuahna tur current nominal ln(8/20μs) . | 5kA a ni |
| Voltage venhimna level Up(8/20μs): | 60V(line atanga line thleng) |
| Voltage venhimna level Up(8/20μs): | 600V(line atanga lei thleng) |
| Standard angin | GB/T18802.21-2016(1EC61643-21:2012 nen a inang) |
| Supply voltage a awm | 20-35VDC thleng a ni |
| Power hmanralna a ni | |
| LED hmanga entir a ni | Green: Power chhinchhiahna a ni |
| Output dik tak a ni | 0.1%FS a ni |
| Temperature a inthlak danglam thin | 0.1%FS/10°C a ni |
| Temperature parameter hrang hrangte | Hnathawh lumna: -20°C~+60°C, dahna hmun:-40°C~+80°C |
| Relative humidity a awm lo | 10%~95% RH ah chuan condensation a awm lo |
| Insulation chakna a ni | ≥2000VAC/min (input/output/power supply inkar) a ni. |
| Insulation a do theih loh | ≥100MΩ (input/output/power supply inkar) a ni. |
| Electromagnetic nena inmil theihna | IEC 61326-1(GB/T 18268) ang chuan, IEC 61326-3-1 |
| MTBF | 100000h a ni |
| Wire mamawh a ni | Cross section ≥ 0.5mm2 a ni a; Insulation chakna ≥ 500V a ni |
| Field hmanrua hman tur | Wire pahnih emaw wire pathum emaw RTD Pt100 |
Dimension a ni
Schematic diagram hmanga siam a ni
Thil chhinchhiah:
1. Power rail function hi optional function a ni a, order an siam dawnin power supply method an tarlan a ngai a ni
Power rail connector thlan dan tur chu "Annex" phek 89-ah en theih a ni.
2. Three wire RTD input dawnin wire pathum te hi a sei zawng a inang vek tur a ni
3. Wire pahnih nei RTD input dawnin safety barrier terminal 4 leh 2 te chu short circuit a ni tur a ni
