- Terminal Board-ah hian a awm a
- Hriselna atana harsatna awmte
- Signal Isolators te pawh a awm
- Surge laka invenna hmanrua te
- Safety Relay te a awm bawk
- Intelligent I/O Module hrang hrang awmte
- Gateways fing tak tak te
- Industrial Data Optical Transceiver hmanga siam a ni
- Online hmanga Dew Point thlirletna
- Data lakkhawmna Modules te
- HART data converter a ni
PHG-11TE+/PHG-12TE+ hmanga siam a ni
A tlangpuiin
Surge protection analog input signal isolator hian wire pahnih emaw pathum emaw 4~20A emaw current source signal te chu isolator kaltlangin current emaw voltage signal output ah a chantir thei a ni. Output parameters te hi user mamawh angin customized theih a ni.
He product hi independent taka power pek a ngai a, power supply, input leh output terminal te pawh isolated a ni.
A chiang zawk
| Input a ni | |
| Signal input a ni | Wire pahnih emaw pathum emaw hmanga transmitter emaw current source signal emaw |
| Distribution voltage a ni | ≥18V a ni |
| Input impedance a awm lo | ≤100Ω a ni |
| Output a ni | |
| A chhuahna signal a ni | DC signal (current/voltage) a awm thei lo. |
| Load resistance a awm thei | Tuna load resistance ≤500Ω a ni Voltage load resistance |
| Surge laka invenna features te chu: | |
| A chhuahna tur current nominal ln(8/20μs) . | 5kA a ni |
| Voltage venhimna level Up(8/20μs): | 60V(line atanga line thleng) |
| Voltage venhimna level Up(8/20μs): | 600V(line atanga lei thleng) |
| Standard angin | GB/T18802.21-2016(1EC61643-21:2012 nen a inang) |
| Parameter bulpui ber berte | |
| Supply voltage a awm | 20~35VDC a ni |
| Power hmanralna a ni | Tuna a chhuah zat Tuna a chhuah zat |
| LED hmanga entir a ni | Green: power chhinchhiahna a ni |
| Chhanna hun pek hun | 5ms chhungin final value 90% a thleng thei |
| Temperature a inthlak danglam thin | 0.005% FS/°C a ni |
| Temperature parameter hrang hrangte | Hnathawh lumna: -20°C ~ +60°C, A dahna hmun: -40°C ~ +80°C |
| Relative humidity a awm lo | 10%~95% RH ah chuan condensation a awm lo |
| Insulation chakna a ni | ≥2000VAC/min (input/output/power supply inkar) a ni. |
| Insulation a do theih loh | 100MΩ (500 V DC) (input/output/power supply inkar) a ni. |
| Electromagnetic nena inmil theihna | GB/T 18268, IEC 61326-1 hmanga tihchhuah a ni |
| MTBF | 80000h a ni |
| Wire mamawh a ni | Cross section ≥ 0.5mm2 a ni a; Insulation chakna ≥ 500W a ni |
| Field hmanrua hman tur | Pahnih, wire thum (HART) transmitter emaw current source emaw a ni |
Dimension a ni
Connection wiring a awm bawk
Thil chhinchhiah:
1. PGH-11TE+ hian output 2 part a huam lo.
2. Power rail power supply hi duhthlan tur a ni. User te chuan order an tih hian power supply mode an tarlang a ngai a ni. Khawngaihin phek 89-a attachment hi en la.
Specification, model leh code hrang hrang te
Entirnan: input pakhat leh output pakhat, wire pahnih emaw pathum emaw 4~20mA input, 4~20mA output, 24V power supply, model: PHG-11TE-21+