I-PHD-11TT-*8

Isithiyo sokuphepha esihlukanisiwe sokufaka i-TC

okokufaka okungu-1 okukhiphayo okungu-1

Okokufaka kwesignali ye-TC

Ukukhishwa kwesignali ye-millivolt engu-1:1

Xhumana nathi

imininingwane yomkhiqizo

Ukubuka konke

Isithiyo sokuphepha sokufakwa kwe-thermocouple singadlulisela isignali ye-millivolt kusuka ku-thermocouple (TC) endaweni eyingozi iye endaweni ephephile ngo-1: 1.

Lo mkhiqizo udinga ukunikezwa kwamandla okuzimele, okuneziphesheli zamandla ezihlukanisiwe, okokufaka, kanye nokukhipha.

"*" imelela uhlobo lokufaka lwe-thermocouple, futhi imodeli ethile imelelwe ikhodi (bheka "Uhlobo Lwesignali Yokufaka kanye Nethebula Lobubanzi" ukuthola imininingwane).

Izinhlobo zesignali yokufaka kanye nobubanzi bokulinganisa
Ikhodi	Imodeli ye-TC	Ububanzi bokulinganisa	Ibanga elincane	Ukunemba kokuguqulwa
1	K	-200~1370℃	50℃	0.5℃/0.1%
2	S	-50~1760℃	500℃	1.5℃/0.1%
3	FUTHI	-140~1000℃	50℃	0.5℃/0.1%
4	J	-160~1200℃	50℃	0.5℃/0.1%
5	B	250~1800℃	500℃	1.5℃/0.1%
6	T	-200~400℃	50℃	0.5℃/0.1%
7	R	-50~1760℃	500℃	1.5℃/0.1%
8	N	-200~1300℃	50℃	0.5℃/0.1%

Imininingwane

Okokufaka endaweni enobungozi
Isignali yokufaka	Izimpawu ze-thermocouple ze-K, S, E, J, B, T, R, N (bheka "Uhlobo Lwesignali Yokufaka kanye Nethebula Lobubanzi" ukuthola imininingwane)
Ibanga lesiginali	-20~80mV.
Umphumela ohlangothini lokuphepha:
Isignali yokuphuma	I-Thermocouple 1: 1
Isikhombisi se-LED	Okuluhlaza: Isikhombisi samandla
Ukunemba kokukhipha	0.05%FS
Isikhathi sokuphendula	Kufinyelelwa ku-90% wenani lokugcina ngaphakathi kwama-300ms
Ukukhukhuleka kwezinga lokushisa	0.005%FS/℃
Amapharamitha okushisa	Izinga lokushisa lokusebenza: -20℃~+60℃, izinga lokushisa lokugcina:-40℃~+80℃
Umswakama ohlobene	10%~95% RH akukho ukujiya
Amandla e-dielectric	Phakathi kohlangothi oluphephile ngokwemvelo kanye nohlangothi oluphephile ngokwemvelo (≥ 3000VAC/min); phakathi kokunikezwa kwamandla kanye netheminali engaphephile ngokuphelele (≥ 1500VAC/min)
Ukumelana nokushisa	≥100MΩ (phakathi kokufaka/ukukhipha/ukunikezwa kwamandla)
Ukuhambisana kwe-electromagnetic	Ngokusho kwe-IEC 61326-1(GB/T 18268), i-IEC 61326-3-1
I-MTBF	Amahora angu-100000
Izidingo zentambo	Ingxenye ephambene ≥ 0.5mm2; Amandla okuvikela ≥ 500V
Imishini yasensimini esebenzayo	Izinzwa ze-TC ze-K. S, E, J, B, T, R, N
Indawo yokufaka	Uma ifakwe endaweni ephephile, ingaxhunywa kumathuluzi okuphepha angaphakathi ezindaweni eziyingozi kuze kufike ku-Zone 0, IIC, Zone 20, kanye ne-IIIC.

Ubukhulu

Umdwebo wesimiso

Qaphela:

1. Umsebenzi wesitimela sikagesi uwumsebenzi ongawukhetha, futhi abasebenzisi badinga ukucacisa indlela yokunikezwa kwamandla lapho befaka i-oda

Ukukhethwa kwezixhumi zesitimela sikagesi kungabhekisela ekhasini 89 le-"Annex"

Isitifiketi esiphephile ngokwendalo

Uphawu lobufakazi bokuqhuma	[Ex ia Ga]lIC [Ex ia Da]lllC
Izinga elivikela ukuqhuma	GB/T3836.1-2021 GB/T3836.4-2021
Amatheminali 3-4	Um:250V AC/DC Uo=8.4V DC lo=31mA I-Po=65.1mW Co=4.8μF Lo=20mH
Umzimba wesitifiketi	I-CQST (Isikhungo Sikazwelonke Sokuqapha Ikhwalithi kanye Nokuhlola Imikhiqizo Kagesi Evikelwe Ukuqhuma)

Idatha yebhasi ye-PH-Co yochungechunge lwe-RS422 Control Net optical...

I-PHM-7230 I-Intelligence Engavikelekile Engavikelekile Engaphakathi...