- Tashar Jiragen Sama
- Shingayen Tsaro da Aka Keɓe
- Masu Rarraba Sigina
- Na'urorin Kariya Masu Tasowa
- Tsaron jigilar kaya
- Modules na I/O masu Hankali da Aka Raba
- Ƙofofin Wayo Masu Hankali
- Masu Canja wurin Bayanan Masana'antu
- Masu Nazarin Dew Point na Kan layi
- Sassan Samun Bayanai
- Mai canza bayanai na HART
Jerin PHL-S.Ex
Bayani
Ana amfani da jerin PHL-S.Ex SPD musamman don kare masu watsawa, maɓallan wuta, siginar mita, kayan aikin sadarwa, masu juriyar zafi, thermocouples da sauran na'urorin filin da aka haɗa a cikin yanayin waya biyu ko waya uku, da kuma I/O na ɗakin sarrafawa, DCS, PLC da sauran na'urori, don hana su lalacewa ta hanyar ƙarfin walƙiya ko ƙarfin lantarki mai aiki.
Babban fasalulluka sune:
2. 7mm siriri sosai, yana adana sarari
3. babban bandwidth, ya dace da duk nau'ikan sigina,
Babban sigogin fasaha
| Sigogi | PHL-S5-L2 Ex PHL-S5-L3 Ex | PHL-S24-L2 Ex PHL-S24-L3 Ex | ||
| Ƙarfin wutar lantarki mai ƙima | 5VDC | 24VDC | ||
| Matsakaicin ƙarfin lantarki na aiki Uc | 6VDC | 32VDC | ||
| Matsayin aikin IL mai ƙima | 600mA | 600mA | ||
| Ta hanyar juriya | Waya 1Ω/waya | Waya 1Ω/waya | ||
| Bandwidth (-0.5dB) | lOMHZ | 10MHZ | ||
| Lokacin amsawa | 1 ns | 1 ns | ||
| Ɓoyewar wutar lantarki | ||||
| Nau'in fitar da ruwa a cikin (8 / 20μs) | 5KA | 10KA | 5KA | 10KA |
| Matsakaicin wutar fitarwa Imax (8 / 20μs) | 10KA | 20KA | 10KA | 20KA |
| Ragewar kwararar walƙiya (10 / 350μs) | Waya 0 5KA/waya | Waya 2KA/waya | 0 5KA/waya | Waya 2KA/waya |
| Ƙarfin kariya Sama (layi-zuwa-layi) | 40V | 60V | ||
| Ƙarfin kariya Layin sama zuwa ƙasa | 600V | 600V | ||
| Matsakaicin zafin jiki | -40℃~+80℃ |
| Danshin da ya dace | 10% ~95% |
| Girman waje (tsawon x faɗin x tsayi) | 105mm X 7mm X 83mm |
| Haɗi | Wayoyin sukurori |
| Matsakaicin yanki na giciye na waya | 2.5mm |
| Yankin giciye na layin dogo mai jagora | 4 ~ 6mm |
| Hanyar shigarwa | Layin dogo na DN35mm |
Tsarin girma na zane
Tsarin zane mai aiki
Hanyar sanya suna
Aikace-aikace na yau da kullun
Takardar shaidar tsaro
(2) Ana iya haɗa tashar da wayar jan ƙarfe mai nau'ikan igiyoyi da yawa tare da yankin giciye na 0.2 ~ 2.5mm2 ko wayar jan ƙarfe mai nau'in igiya ɗaya tare da yankin giciye na 0.2 ~ 4mm2;
(3) Tsawon cire waya yana da kusan 5-8mm, wanda aka kulle shi da sukurori.
Tsarin PHL-S.Ex na duniya baki ɗaya ya rungumi hanyar shigar da layin dogo na jagora na DIN35mm, kuma matakan sune kamar haka:
⑴ Manne ƙarfe na sama a ƙasan kayan aikin a kan layin DIN;
⑵ Tura ɓangaren ƙarfe da ke ƙasan kayan aikin zuwa cikin layin jagora;
⑶ Shawarar amfani da sandunan jan ƙarfe ko ƙarfe.
Rushewa
(1) Saka sukudireba (faɗin ruwan wuka ≤ 3.5 mm) a cikin ramin da ke ƙasan allon kayan aiki;
(2) Tura sukudireba sama don ɗaga maƙallin ƙarfe;
(3) Ja kayan aikin ƙasa da kuma fitar da shi daga layin jagora.
Gyara
(1) Lokacin amfani da SPD, dole ne a sami ingantaccen tushe;
(2) Kafin a kunna wutar lantarki ta SDP kuma a gyara matsalar, ya zama dole a sake duba ko haɗin da ke tsakanin tashoshin shigarwa da fitarwa daidai ne;
(3) An yi bincike mai zurfi da kuma kula da inganci kafin a bar masana'antar. Idan ka ga cewa aikin ba shi da kyau kuma kana zargin cewa na'urar cikin gida tana da matsala, tuntuɓi wakilin da ke kusa ko kuma ka tuntuɓi layin taimakon fasaha kai tsaye a kan lokaci;
(4) Cikin shekara guda daga ranar isarwa, duk wata matsala ta ingancin samfura yayin amfani da su na yau da kullun za ta samu ta Beijing Pinghe kyauta.