- Terminal Board
- Jam gwoko kwo ma juketho kende
- Jam poko lanyuth
- Jam tic mi gwoko kwo pa dhanu
- Relays mi gwoko kwo
- I/O Modules ma rieko ma jupoko
- Dhugola ma rieko
- Jam tic ma tiyo ku mac
- Dew Point Analyzers mi intanet
- Module mi nwangu lembe
- HART data converter
PHL-S.Ex series
Neno wi lembe
PHL-S.Ex series SPD jutiyu kudu pi gwoko transmitters, switches, frequency signals, jam wec, thermal resistors, thermocouples man jam tic mukende ma jukubo ku waya aryo nyo adek, man bende ot I/O, DCS, PLC man jam tic mange, kara kud unyoth gi ku mac ma wok kud i mac nyo voltage voltage ma kadho.
Lembe madongo utiye:
2. 7mm ultra-thin, gwoko kabedo
3. bandwidth ma malo, maber pi kit lembe zo,
Lembe madongo mi tic
| Parameter | PHL-S5-L2 Ex PHL-S5-L3 Ex | PHL-S24-L2 Ex PHL-S24-L3 Ex | ||
| Voltage ma juporo ku tic | 5VDC | 24VDC | ||
| Maximum operating voltage Uc | 6VDC | 32VDC | ||
| Rated operating current IL | 600mA | 600mA | ||
| Ku yore mi juku | 1Ω／waya | 1Ω／waya | ||
| Bandwidth (-0.5dB) | lOMHZ | 10MHZ | ||
| Saa mi dwoko wang lembe | 1 ns | 1 ns | ||
| Leakage current | ||||
| Nominal discharge current In (8 / 20μs) | 5KA | 10KA | 5KA | 10KA |
| Imax ma dit uloyu (8 / 20μs) | 10KA | 20KA | 10KA | 20KA |
| Lightning surge current limp (10 / 350μs) | 0 5KA／waya | 2KA／waya | 0 5KA/waya | 2KA／waya |
| Voltage mi gwoko piny ( line-to-line) | 40V | 60V | ||
| Voltage mi gwoko up line ni ngom | 600V | 600V | ||
| Kabedo mi lyethu | -40°C~+80°C |
| Piny ma ngic | 10%~95% |
| Kite ma woko (bor x lac x bor) | 105mm X 7mm X 83mm |
| Ribu | Screw wiring |
| Kabedo madit pa waya | 2.5mm |
| Kabedo ma jupoko i iye waya mi grounding rail | 4~6mm |
| Yore mi ketho | DN35mm Rail |
Cal mi dit pa piny
Cal pa tic
Yore mi mio nying
Tic ma pol kare
Karatasi mi gwoko kuc
(2) Terminal copo bedu ku waya mi copper ma rwom pare 0.2~2.5mm2 nyo waya mi copper ma rwom pare 0.2~4mm2;
(3)Bor pa waya ma juwodho ubedo 5-8mm, ma jugwoko ku screws.
PHL-S.Ex series universal model tiyo ku DIN35mm guide rail installation method, man yore utiye ma e:
4Clamp the upper metal in there of the instrument on the DIN rail;
⑵Ci dul pa cuma ma piny pa jam tic i guide rail;
⑶Nyut paru mi tic ku copper nyo steel rails.
Poko piny
(1) Keth screwdriver (lac pa pala ≤ 3.5 mm) i thenge ma piny pa jam tic;
(2) Cwal screwdriver malu pi ketho latch mi cuma;
(3)Tul piny ne piny man iwok kudi i guide rail.
Gwoko
(1) Ka itiyo ku SPD, umitu ibed ku grounding maber;
(2) Mapodi SDP utimbre ku mac man juyike, eber ni neno kendu ka rwom pa input ku output terminals utiye kakare;
(3) Piny ma juyubu ukadhu kud i nen pa piny man nen pa ber pa piny ne mapodi juwok kud i factory. Ka inwango nia tic utiye marac man iparu niya module ma iye utiye marac, kwayu ilok ku jara tic ma ceng kudu nyo ilok ku namba mi kony mi tic i kare ma mitire;
(4) I kind oro acel nicaku i ceng ma jucwalo kudu piny, peko moku ci ma wok ikum piny ma jutiyo kudu i kare ma jutiyo kudu maber jubi yiko ku Beijing Pinghe ma cul epe.