- Terminal Board
- Jam gwoko kwo ma juketho kende
- Jam poko lanyuth
- Jam tic mi gwoko kwo pa dhanu
- Relays mi gwoko kwo
- I/O Modules ma rieko ma jupoko
- Dhugola ma rieko
- Jam tic ma tiyo ku mac
- Dew Point Analyzers mi intanet
- Module mi nwangu lembe
- HART data converter
PHL-T series
Kit piny
Lembe madongo utiye:
1. Ku tic mi ngiyo wang dirisa ma rac (ma imito)
2. 12.4mm ultra-thin, ma tiyo ku dual-channel signal transmission, gwoko kabedo;
3. Bandwidth ma malo man rwinyo ma nok, maber pi kit lanyuth zo;
Lembe mi tic
| Parameter | PHL-T5-L2-EX PHL-T5-L3-EX PHL-T5-L4-EX | PHL-T5-G2-EX PHL-T5-G4-EX | PHL-T24-L2-EX PHL-T24-L3-EX PHL-T24-L4-EX | PHL-T24-G2-EX PHL-T24-G4-EX |
| Voltage ma juporo ku tic | 5VCD | 5VCD | 24VDC | 24VDC |
| Maximum operating voltage Uc | 6VDC | 6VDC | 32VDC | 32VDC |
| Rated operating current IL | 600mA | 600mA | 600mA | 600mA |
| Ku yore mi juku | 1Ω/line | 1Ω/waya | 1Ω/waya | 1Ω/waya |
| Bandwidth (-0.5dB) | 10MHZ | 10MHZ | 10MHZ | 10MHZ |
| Saa mi dwoko wang lembe | 1ns | 1ns | 1ns | 1ns |
| Leakage current | ||||
| Nominal discharge current In (8 / 20μs) | 10kA/waya | 10kA/waya | 10kA/waya | 10kA/waya |
| Imax ma dit uloyu (8 / 20μs) | 20kA/waya | 20kA/waya | 20kA/waya | 20kA/waya |
| Lightning surge current limp (10 / 350μs) | 2.5kA/waya | 2.5kA/waya | 2.5kA/waya | 2.5kA/waya |
| Voltage mi gwoko piny up line-to-line | 40V | 40V | 60V | 60V |
| Voltage mi gwoko up line ni ngom | 600V | 40V | 600V | 60V |
| Kabedo mi lyethu | -40°C～＋80°C |
| Piny ma ngic | 10ｅ～95％ |
| Kite ma woko (bor x lac x bor) | 90.0mm×12.4mm×77.5mm |
| Ribu | Screw wiring |
| Kabedo madit pa waya | 2.5mm |
| Kabedo ma jupoko i iye waya mi grounding rail | 4～6mm |
| Yore mi ketho | DN35mm Rail |
Cal mi dit pa piny
Tic mi nyang ikum dirisa ma rac
Karatasi mi gwoko kuc
(2) Terminal copo bedu ku waya mi copper ma rwom pare 0.2~2.5mm2 nyo waya mi copper ma rwom pare 0.2~4mm2;
(3)Bor pa waya ma juwodho ubedo 5-8mm, ma jugwoko ku screws.
PHL-T series universal model tiyo ku DIN35mm guide rail installation method, man yore utiye ma e:
4Clamp the upper metal in there of the instrument on the DIN rail;
⑵Ci dul pa cuma ma piny pa jam tic i guide rail;
⑶Nyut paru mi tic ku copper nyo steel rails.
Poko piny
Gwoko
(1) Ka itiyo ku SPD, umitu ibed ku grounding maber;
(2) Mapodi SDP utimbre ku mac man juyike, eber ni neno kendu ka rwom pa input ku output terminals utiye kakare;
(3) Piny ma juyubu ukadhu kud i nen pa piny man nen pa ber pa piny ne mapodi juwok kud i factory. Ka inwango nia tic utiye marac man iparu niya module ma iye utiye marac, kwayu ilok ku jara tic ma ceng kudu nyo ilok ku namba mi kony mi tic i kare ma mitire;
(4) I kind oro acel nicaku i ceng ma jucwalo kudu piny, peko moku ci ma wok ikum piny ma jutiyo kudu i kare ma jutiyo kudu maber jubi yiko ku Beijing Pinghe ma cul epe.