Shigarwar Dijital
- Tashar Jiragen Sama
- Shingayen Tsaro da Aka Keɓe
- Masu Rarraba Sigina
- Na'urorin Kariya Masu Tasowa
- Tsaron jigilar kaya
- Modules na I/O masu Hankali da Aka Raba
- Ƙofofin Wayo Masu Hankali
- Masu Canja wurin Bayanan Masana'antu
- Masu Nazarin Dew Point na Kan layi
- Sassan Samun Bayanai
- Mai canza bayanai na HART
PHD-11TF-28+
Bayani
Katangar tsaro da aka keɓe tare da aikin kariyar ƙaruwa na fitowar transistor na shigarwar maɓalli, wanda ke keɓancewa da aika siginar shigarwa daga lambobin maɓalli ko maɓalli na kusanci a wurare masu haɗari zuwa yankin aminci tare da transistor na fitarwa ta hanyar shingen aminci. Ana samun gano matsalar layi ta hanyar LED a saman module ɗin. Ana amfani da maɓallin kira na module don saita shigarwa da fitarwa a cikin lokaci ko sarrafawa na baya, da kuma kunna ko kashe aikin alamar faɗakarwar gano matsalar layi. Wannan samfurin yana buƙatar samar da wutar lantarki mai zaman kanta, tare da samar da wutar lantarki mai keɓewa, shigarwa, da tashoshin fitarwa.
| Shigarwa a cikin yanki mai haɗari | |
| Siginar shigarwa | Canja wurin lambobin sadarwa/makusanta |
| Ƙarfin wutar lantarki na firikwensin | Kimanin 8V |
| Kewayen mitoci na shigarwa | ≤5kHz |
| Sifofin shigarwa/fitarwa: | |
| Shigarwar kan shafin yanzu | >2.1mA, fitarwar tana rufewa, tana nuna ON; Lokacin da |
| Maɓallin sarrafawa tsakanin yanayin juyawa da yanayin fitarwa na yau da kullun ec | Lokacin da maɓallin kira na K1 yake a "ON", fitowar transistor ec yana cikin yanayin juyawa Lokacin da maɓallin kira na K1 yake a "KASHE", fitowar transistor ec yana cikin yanayin yau da kullun Lokacin da K2 yake a "ON", da'irar za ta zaɓi aikin ƙararrawa na nunin LFD mai ja. |
| Fitarwa | |
| Siginar fitarwa | Transistor da na'urar jijjiga ƙararrawa (zaɓi ne) |
| Ƙarfin tuƙi | Wutar lantarki da aka fitar ≤20mA (1.2kΩ), matsakaicin wutar lantarki ta ciki 100mA, sanye take da kariyar wutar lantarki ta ɗan gajeren lokaci |
| Fasali na kariyar karuwa: | |
| Nau'in wutar lantarki mai fitarwa ln(8/20μs) | 5kA ku |
| Matsayin kariyar wutar lantarki Sama (8/20μs): | 60V (layi zuwa layi) |
| Matsayin kariyar wutar lantarki Sama (8/20μs): | 600V (layi zuwa ƙasa) |
| Dangane da ƙa'idodi | GB/T18802.21-2016(daidai da 1EC61643-21:2012) |
| Sigogi na asali | |
| Ƙarfin wutar lantarki | 20~35VDC |
| Amfani da wutar lantarki | |
| Alamar LED | Kore: Alamar wuta Rawaya: Transistor na fitarwa a yanayin aiki na yau da kullun Ja: Alamar LFD, ƙararrawar laifuffuka ta layi |
| Sigogin zafin jiki | Zafin Aiki: -20℃ ~ +60℃, Zafin Ajiya: -40℃ ~ +80℃ |
| Danshin da ya dace | 10% ~ 95% RH babu danshi |
| Ƙarfin rufin | Tsakanin ɓangaren da ke da aminci a cikin zuciya da ɓangaren da ba shi da aminci a cikin zuciya (≥3000VAC/min); tsakanin wutar lantarki da ɓangaren da ba shi da aminci a cikin zuciya (≥1500VAC/min) |
| Juriyar rufi | ≥100MΩ (tsakanin shigarwa/fitarwa/ samar da wutar lantarki) |
| Dacewar na'urar lantarki | GB/T 18268 (IEC 61326-1) |
| MTBF | 80000h |
| Bukatun waya | Sashe na giciye ≥ 0.5mm²; Ƙarfin rufi ≥ 500V |
| Kayan aikin filin da suka dace | Kayan aikin filin kamar busassun hulɗa ko shigarwar makunnin kusanci na nau'in NAMUR waɗanda suka dace da ƙa'idar DIN19234 |
Lura: Samar da wutar lantarki ta layin wutar lantarki aiki ne na zaɓi.
Masu amfani suna buƙatar ƙayyade yanayin samar da wutar lantarki lokacin yin oda.
Da fatan za a duba abin da aka makala a shafi na 89.
Gano Laifi na Layi (LFD)
Masu amfani za su iya zaɓar ɓangaren "ON" na makullin a saman makullin
don kunna aikin gano lahani da kuma nuna ƙararrawa ta hanyar
hasken ja na LED. Wutar lantarki ta shigarwa a wurin> 7mA, ƙararrawa ta gajeren da'ira (SC);
Wutar lantarki ta shigarwar da ke kan wurin
Shigar da lamba yana buƙatar aikin gano lahani (karyewar waya, gajere
da'ira), ya kamata a haɗa resistor mai ƙarfin 22k Ω a layi ɗaya a ƙarshen biyu
na maɓallin, da kuma resistor 680 Ω ya kamata a haɗa su a jere (kamar yadda
An nuna a cikin zane-zanen wayoyi don hulɗar maɓalli II).
PHD-11TC-33A-23
PHD-11TF-28+