Fitowar Dijital
- Tashar Jiragen Sama
- Shingayen Tsaro da Aka Keɓe
- Masu Rarraba Sigina
- Na'urorin Kariya Masu Tasowa
- Tsaron jigilar kaya
- Modules na I/O masu Hankali da Aka Raba
- Ƙofofin Wayo Masu Hankali
- Masu Canja wurin Bayanan Masana'antu
- Masu Nazarin Dew Point na Kan layi
- Sassan Samun Bayanai
- Mai canza bayanai na HART
PHC-11TF-16
Bayani
Katangar tsaro da aka ware daga fitarwa tana tuƙa kayan aikin da ke cikin wurin da ke da aminci a cikin yankin mai haɗari ta hanyar maɓallin hulɗa da sarrafa siginar matakin dabaru a yankin aminci. Ta haka ne ake sarrafa bawuloli na solenoid, ƙararrawa na sauti da haske, da sauransu. An saita hasken alamar yanayin siginar a launuka ja da rawaya, ƙararrawa tana nuna ja, kuma bawul ɗin solenoid na fitarwa da sauran ayyukan aiki suna nuna rawaya. Wannan samfurin yana buƙatar a kunna shi daban-daban, kuma samar da wutar lantarki,Ana ware tashoshin shigarwa da fitarwa tsakanin juna.
| Shigarwa a cikin amintaccen wuri | |
| Siginar shigarwa | Canja lamba, matakin dabaru |
| Haɗarin sakamako mai haɗari: | |
| Ƙarfin wutar lantarki na buɗewa | 22V~24V DC, UE/IE=12V/35mA |
| Aikin juyawa | An saita K1 zuwa gefen ON, kuma fitowar da'irar ta juya. |
| Sigogi na asali | |
| Ƙarfin wutar lantarki | 20~35VDC |
| Amfani da wutar lantarki | ≤100mA (Wutar lantarki ta 24V, lokacin da aka rarraba wutar lantarki ta 12V/60mA) |
| Alamar LED | Kore: Alamar wuta |
| Rawaya: Mai watsawa fitarwa a yanayin aiki na yau da kullun | |
| Aikin jigilar ƙararrawa | Lokacin da maɓallin kira na K2 yake a gefen "ON", aikin ƙararrawa na zaɓin da'ira |
| Juriyar lodi | |
| Juriyar Load> 10kΩ, ƙararrawa ta da'irar buɗewa (LB) | |
| Lokacin amsawa na halayen rediyon ƙararrawa | Lokacin amsawa: 20ms |
| Ƙarfin tuƙi: 250VAC/2A, nauyin juriya na 30VDC/2A | |
| Nau'in Load: Nauyin juriya | |
| Sigogin zafin jiki | Zafin aiki: -20℃ ~ +60℃, |
| Zafin ajiya: -40℃ ~ +80℃ | |
| Danshin da ya dace | 10% ~ 95% RH babu danshi |
| Ƙarfin rufin | Tsakanin ɓangaren da ke da aminci a cikin zuciya da ɓangaren da ba shi da aminci a cikin zuciya (≥3000VAC/min); tsakanin wutar lantarki da ɓangaren da ba shi da aminci a cikin zuciya (≥1500VAC/min) |
| Juriyar rufi | ≥100MΩ (tsakanin shigarwa/fitarwa/ samar da wutar lantarki) |
| Dacewar na'urar lantarki | A cewar IEC 61326-1 (GB/T 18268), IEC 61326-3-1 |
| MTBF | 100000h |
| Bukatun waya | Sashe na giciye ≥ 0.5mm2; Ƙarfin rufi ≥ 500V |
| Kayan aikin filin da suka dace | Ƙararrawa mai ji da gani, bawul ɗin solenoid mai aminci a cikin ciki |
| Wurin shigarwa | An sanya shi a cikin yankin aminci, ana iya haɗa shi da kayan aikin tsaro na ciki a cikin yankuna masu haɗari har zuwa Yanki 0, IIC, Yanki 20, da IIIC. |
| Takaddun shaida na aminci | |
| Alamar tabbatar fashewa | [Ex ia Ga]lIC [Ex ia Da]lllC |
| Ma'aunin kariya daga fashewa | GB/T3836.1-2021 GB/T3836.4-2021 |
| Tashoshi 3-4 | Um: 250V AC/DC Uo=25.2V DC Io=170mA |
| Po=1.07W Co=0.82μF Lo=4mH | |
| Hukumar ba da takardar shaida | CQST (Cibiyar Kula da Ingancin Ƙasa da Gwaji ta Kare Kayayyakin Wutar Lantarki ta Ƙasa ta China) |
PHD-11TC-33A-23
