Umphumela wedijithali
- Ibhodi yeTheminali
- Iinqabo zokuphepha ezihlukanisiweko
- Iinsetjenziswa ezihlukanisako zesiginali
- Iinsetjenziswa zokuvikela ama-Surge
- Iinsetjenziswa zokuphepha
- Amamojula we-I/O ahlakaniphileko ahlukileko
- Amasango ahlakaniphileko
- Iinsetjenziswa ze-Optical Data yezebubulo
- Iinhlaziyi ze-Inthanethi ze-Dew Point
- Amamojula wokuthola idatha
- Umtjhugululi wedatha we-HART
PHC-11TF-16
Ukuhlolisisa
Isithiyo sokuphepha esihlukanisiweko sokukhiqiza ukutjhugulula siqhuba imitjhini ephephileko endaweni eyingozi ngokusebenzisa iswitjhi yokuthintana nokulawula isignali yezinga le-logic endaweni ephephileko. Ngaleyo ndlela kulawulwa amavalvu we-solenoid, ama-alamu womdumo nokukhanya, njll. Isibani esibonisa ubujamo besiginali sisethwe ngemibala ebomvu nephuzi, i-alamu itjengisa obomvu, begodu ivalvu ye-solenoid ephumako neminye imisebenzi yokusebenza itjengisa ophuzi. Umkhiqizo lo udinga ukunikelwa amandla ngokuzijamela, begodu umthombo wamandla,amatheminali wokufaka nokukhipha ahlukaniswe phakathi komunye nomunye.
| Faka endaweni ephephileko | |
| Isiginali yokufaka | Tjhugulula ukuthintana, izinga lokucabanga |
| Umphumela oyingozi: | |
| Ivoltheji yesekethe evulekileko | 22V~24V DC, UE/IE=12V/35mA |
| Umsebenzi wokuguqula | I-K1 isethwe ngehlangothini le-ON, begodu umphumela wesiyingi uphendukile. |
| Amapharamitha asisekelo | |
| Ivoltheji yokuphakela | 20~35VDC |
| Ukusetjenziswa kwamandla | ≤100mA(24V power supply,lokha 12V/60mA amandla wokusabalalisa) |
| Isitjengiso se-LED | Okuluhlaza: Inkomba yamandla |
| Ophuzi: I-output relay isesimeni esijayelekileko sokusebenza | |
| Umsebenzi wokudlulisa i-alamu | Lokha iswitjhi yokudayela i-K2 isehlangothini elithi "VULWE", umsebenzi we-alamu yokukhetha isekethe |
| Ukujamelana nomthwalo | |
| Ukujamelana nomthwalo>10kΩ, i-alamu yesekhethi evulekileko (LB) | |
| Isikhathi sokuphendula esiqakathekileko se-alamu | Isikhathi sokuphendula: 20ms |
| Amandla wokutjhayela: 250VAC/2A, 30VDC/2A umthwalo wokujamelana | |
| Umhlobo womthwalo: Umthwalo ojamelanako | |
| Amapharamitha womtjhiso | Izinga lokutjhisa lokusebenza: -20°C ~ +60°C, |
| Izinga lokutjhisa lokugcina: -40°C ~ +80°C | |
| Umswakama ohlobene | 10%~95% RH akukho ukutjhisa |
| Amandla wokuvikela | Phakathi kwehlangothi eliphephileko nelingaphephileko (≥3000VAC/min); hlangana nokuphakelwa kwamandla nehlangothi elingaphephiko (≥1500VAC/min) |
| Ukujamelana nokuvikela | ≥100MΩ (phakathi kokufaka/ukukhipha/ukuphakelwa kwamandla) |
| Ukukhambisana kwe-elekthromagnethi | Ngokuya nge-IEC 61326-1 (GB/T 18268), i-IEC 61326-3-1 |
| MTBF | 100000h |
| Iimfuneko zeentambo | Isigaba esiphambanweni ≥ 0.5mm2; Amandla wokuvikela ≥ 500V |
| Iinsetjenziswa ezisebenzako | I-alamu ezwakalako nebonakalako, ivalvu ye-solenoid ephephileko |
| Indawo yokufaka | Ifakwe endaweni ephephileko, ingahlanganiswa namathulusi wokuphepha wangaphakathi eendaweni eziyingozi ukuya ku-Zone 0, IIC, Zone 20, kanye ne-IIIC |
| Isitifiketi sokuphepha | |
| Iphawu lokuvikela ukuqhuma | [Ex ia Ga]lIC [Ex ia Da]lllC |
| Izinga elivikela ukuqhuma | GB/T3836.1-2021 GB/T3836.4-2021 |
| Amatheminali 3-4 | Um:250V AC/DC Uo=25.2V DC Io=170mA |
| Po=1.07W Co=0.82μF Lo=4mH | |
| Umzimba wesitifiketi | I-CQST (i-China National Quality Supervision and Test Center of Explosion Protected Electrical Products) |
PHD-11TC-33A-23
