Digital Output a ni
- Terminal Board-ah hian a awm a
- Hriselna atana harsatna awmte
- Signal Isolators te pawh a awm
- Surge laka invenna hmanrua te
- Safety Relay te a awm bawk
- Intelligent I/O Module hrang hrang awmte
- Gateways fing tak tak te
- Industrial Data Optical Transceiver hmanga siam a ni
- Online hmanga Dew Point thlirletna
- Data lakkhawmna Modules te
- HART data converter a ni
01 a ni02 a ni03 a ni04 a ni05 a ni
PHC-11TF-16 hmanga siam a ni
A tlangpuiin
Switching output isolated safety barrier hian hazardous area-a on-site intrinsically safe equipment chu contact switch leh safe area-a logic level signal control hmangin a khalh a ni. Chutiang chuan solenoid valve, sound leh light alarm, etc. controlling signal status indicator light chu red leh yellow color-ah set a ni a, alarm chu red a lang a, output solenoid valve leh hnathawhna dangte chu yellow-in a lang bawk. He product hi independent taka power pek a ngai a, power supply, .input leh output terminal te chu an inkar ah an inthen darh a.
| Hmun him takah input rawh | |
| Signal input a ni | Contact, logic level thlak danglam rawh |
| Side output hlauhawm tak chu: | |
| Open circuit voltage a ni | 22V~24V DC, UE/IE=12V/35mA a ni |
| Inversion function a ni | K1 chu ON lam ah dah a ni a, circuit output chu inverted a ni. |
| Parameter bulpui ber berte | |
| Supply voltage a awm | 20~35VDC a ni |
| Power hmanralna a ni | ≤100mA(24V power supply,12V/60mA power sem chhuah a nih chuan) |
| LED hmanga entir a ni | Green: Power chhinchhiahna a ni |
| Yellow: Output relay chu a hnathawh dan pangngaiah a awm | |
| Alarm relay hnathawh dan | Dial switch K2 chu "ON" lam a nih chuan circuit thlan alarm function a ni |
| Load resistance | |
| Load resistance>10kΩ, open circuit alarm (LB) a awm bawk. | |
| Alarm relay-a chhanna hun ziarang | Chhanna hun: 20ms |
| A khalh theihna: 250VAC/2A, 30VDC/2A resistive load | |
| Load chi hrang hrang: Resistive load | |
| Temperature parameter hrang hrangte | Hnathawh lumna: -20°C ~ +60°C, |
| A dahna hmun: -40°C ~ +80°C | |
| Relative humidity a awm lo | 10%~95% RH ah chuan condensation a awm lo |
| Insulation chakna a ni | Intrinsically safe side leh non-intrinsically safe side (≥3000VAC/min) inkar; power supply leh non-intrinsically safe side (≥1500VAC/min) inkar a ni. |
| Insulation a do theih loh | ≥100MΩ (input/output/power supply inkar) a ni. |
| Electromagnetic nena inmil theihna | IEC 61326-1 (GB/T 18268) ang chuan IEC 61326-3-1 |
| MTBF | 100000h a ni |
| Wire mamawh a ni | Cross section ≥ 0.5mm2 a ni a; Insulation chakna ≥ 500V a ni |
| Field hmanrua hman tur | Alarm hriat theih leh hmuh theih, intrinsically safe solenoid valve |
| Installation hmun a ni | Safe zone-a dah a nih chuan Zone 0, IIC, Zone 20, leh IIIC thlenga hmun hlauhawma intrinsic safety instrument-te nen a inzawm thei a ni |
| Safety certification pek a ni | |
| Explosion proof chhinchhiahna | [Ex ia Ga]lIC [Ex ia Da]lllC |
| Puak thei lo standard a ni | GB/T3836.1-2021 thleng a ni GB/T3836.4-2021 ah a awm a |
| Terminal 3-4 thleng a awm | Um:250V AC/DC Uo=25.2V DC Io=170mA a ni thei bawk |
| Po=1.07W Co=0.82μF Lo=4mH a ni | |
| Certification siamtu pawl a ni | CQST(China National Quality Supervision leh Explosion Protected Electrical Products te enfiahna hmun) |
PHD-11TC-33A-23-ah a awm bawk
