- Terminal Board-ah hian a awm a
- Hriselna atana harsatna awmte
- Signal Isolators te pawh a awm
- Surge laka invenna hmanrua te
- Safety Relay te a awm bawk
- Intelligent I/O Module hrang hrang awmte
- Gateways fing tak tak te
- Industrial Data Optical Transceiver hmanga siam a ni
- Online hmanga Dew Point thlirletna
- Data lakkhawmna Modules te
- HART data converter a ni
PHC-11TF-14 a ni
A tlangpuiin
Switching output isolated safety barrier hian on-site chu a khalh a ni intrinsically safe equipment chu hazardous area-ah contact switch leh safe area-a logic level signal control hmangin. Chutiang chuan solenoid valve control-na, sound leh light alarm, etc. Signal status indicator light chu red leh yellow color-a set a nih chuan alarm a rawn lang ang red, leh output solenoid valve leh hnathawh tur dangte a lantir bawk eng.
He product hi independent taka power pek a ngai a, power supply, input leh output terminal te chu a inkar ah isolated a ni.
| Supply voltage a awm | 20 ~ 35V DC, Power hman zat: ≤80mA(24V power supply, 12V/45mA power sem chhuah a nih chuan) . |
| Signal input a ni | Contact, logic level thlak danglam rawh |
| A chhuahna signal a ni | A rilru a buai em em a, a rilru a hah em em bawk a. UE/IE=12.8V/45mA |
| Inversion function: K1 hi "ON" lam ah dah a ni a, circuit output chu inverted a ni. | |
| Alarm relay hnathawh dan | Dial switch K2 chu "ON" lam ah dah a ni a, circuit chuan alarm function a hmang ta a ni |
| Load Resistance10KΩ, open circuit alarm (LB) te chu a chhuak thei lo. | |
| Alarm relay chhuah dan tur | Response time: 20ms, lirthei khalh theihna: 250VAC/2A, 30VDC/2A resistive load hnuaiah |
| Input leh output channel awm zat | 1 input 1 output a ni |
| Onsite hmanrua hman tur | Safety solenoid valve, hriat theih leh hmuh theih alarm |
| Temperature parameter hrang hrangte | Hnathawh lumna: -20°C~+60°C, dahna hmun:-40°C~+80°C |
| Relative humidity a awm lo | 10%~95% RH ah chuan condensation a awm lo |
| Dielectric chakna a ni | Intrinsically safe side leh non-intrinsically safe side inkar (≥ 3000VAC/min); power supply leh non-intrinsically safe terminal (≥ 1500VAC/min) inkar a ni. |
| Insulation a do theih loh | ≥100MΩ (input/output/power supply inkar) a ni. |
| Pawn lam dimensions te | A thuk zawng 12.5mm x a zau zawng 108mm x a san zawng 118mm |
| Electromagnetic nena inmil theihna | IEC 61326-1(GB/T 18268) ang chuan, IEC 61326-3-1 |
| Puak thei lo chhinchhiahna | [Ex ia Ga] IIC [Ex ia Da] IIIC |
| Certification Body a ni | CQST(China National Quality Supervision leh Explosion Protected Electrical Products te enfiahna hmun) |
| Authentication parameters (terminal 3-4 inkar) 1.1. | Um=250V a ni Voltage=28V a ni I=119mA a ni Co=0.05μF a ni Lo=2.1mH a ni Po=0.83W a ni |
| Installation site-a thil tulte | Safe zone-a dah a nih chuan a connect theih hmun hlauhawma intrinsic safety instruments te hman a ni Zone 0, IIC, Zone 20, leh IIIC thlengin a ni |
Note: Power rail power supply hi duhthlan tur a ni. User te chuan an mamawh a ni order i tih hunah power supply mode kha tarlang rawh.
Khawngaihin phek 89-a attachment hi en la.
