- Ibhodi Yesiphetho
- Izithiyo Zokuphepha Ezihlukanisiwe
- Izihlukanisi Zesignali
- Amadivayisi Okuvikela Okukhuphukayo
- Ukudluliselwa Kokuphepha
- Amamojula e-I/O ahlakaniphile ahlukanisiwe
- Amasango Ahlakaniphile
- Ama-Transceiver Optical Data Ezimboni
- Abahlaziyi be-Dew Point abaku-inthanethi
- Amamojula Okuthola Idatha
- Isiguquli sedatha se-HART
I-PHC-11TF-14
Ukubuka konke
Isithiyo sokuphepha esihlukanisiwe esiphumayo sishayela endaweni imishini ephephile ngokwemvelo endaweni eyingozi ngokusebenzisa inkinobho yokuxhumana kanye nokulawula isignali yezinga le-logic endaweni ephephile. ama-valve e-solenoid alawulayo, ama-alamu omsindo nokukhanya, njll. Isiginali ukukhanya kwesikhombisi sesimo kusethwe ngemibala ebomvu nephuzi, i-alamu iyabonisa obomvu, kanye nesibonisi se-solenoid valve kanye neminye imisebenzi yokusebenza ophuzi.
Lo mkhiqizo udinga ukunikezwa amandla ngokuzimela, futhi amatheminali okunikezwa kwamandla, okokufaka kanye nokukhiphayo ahlukaniswe phakathi kwawo.
| I-voltage yokunikezela | 20~35V DC, Ukusetshenziswa kwamandla: ≤80mA (ukunikezwa kwamandla angu-24V, lapho ukusatshalaliswa kwamandla okungu-12V/45mA) |
| Isignali yokufaka | Shintsha oxhumana naye, izinga lokuqonda |
| Isignali yokuphuma | I-voltage yesekethe evulekile >24V, UE/IE=12.8V/45mA |
| Umsebenzi wokuguqula: I-K1 isethwe ohlangothini "OLWENI", umphumela wesekethe uguqulwe. | |
| Umsebenzi wokudlulisa i-alamu | Iswishi yokudayela i-K2 isethwe ohlangothini oluthi "ON", isekethe isebenzisa umsebenzi we-alamu |
| Ukumelana Nomthwalo10KΩ, i-alamu yesekethe evulekile (LB) | |
| Izici zokukhipha i-alamu | Isikhathi sokuphendula: 20ms, amandla okushayela: 250VAC/2A, 30VDC/2A ngaphansi komthwalo wokumelana |
| Inani leziteshi zokufaka nezokukhipha | okokufaka okungu-1 okukhiphayo okungu-1 |
| Imishini esebenzayo endaweni | I-valve ye-solenoid yokuphepha, i-alamu ezwakalayo nebonakalayo |
| Amapharamitha okushisa | Izinga lokushisa lokusebenza: -20℃~+60℃, izinga lokushisa lokugcina:-40℃~+80℃ |
| Umswakama ohlobene | 10%~95% RH akukho ukujiya |
| Amandla e-dielectric | Phakathi kohlangothi oluphephile ngokwemvelo kanye nohlangothi oluphephile ngokwemvelo (≥ 3000VAC/min); phakathi kokunikezwa kwamandla kanye netheminali ephephile ngokwemvelo (≥ 1500VAC/min) |
| Ukumelana nokushisa | ≥100MΩ (phakathi kokufaka/ukukhipha/ukunikezwa kwamandla) |
| Ubukhulu bangaphandle | Ubukhulu 12.5mm x ububanzi 108mm x ukuphakama 118mm |
| Ukuhambisana kwe-electromagnetic | Ngokusho kwe-IEC 61326-1(GB/T 18268), i-IEC 61326-3-1 |
| Uphawu olungavimbeli ukuqhuma | [Ex ia Ga] IIC [Ex ia Da] ⅢC |
| Umzimba Wokuqinisekisa | I-CQST (Isikhungo Sikazwelonke Sokuqapha Ikhwalithi kanye Nokuhlola Imikhiqizo Kagesi Evikelwe Ukuqhuma) |
| Amapharamitha okuqinisekisa (phakathi kwama-terminal 3-4) | Um=250V I-Voltage=28V I=119mA I-Co=0.05μF I-Lo=2.1mH I-Po=0.83W |
| Izidingo Zendawo Yokufaka | Uma ifakiwe endaweni ephephile, ingaxhunywa ku- amathuluzi okuphepha angaphakathi ezindaweni eziyingozi kuze kufike ku-Zone 0, IIC, Zone 20, kanye ne-IIIC |
Qaphela: Ukunikezwa kwamandla kwesitimela sikagesi kuyisici ongazikhethela sona. Abasebenzisi kudingeka cacisa imodi yokunikezwa kwamandla uma u-oda.
Sicela ubheke okunamathiselwe ekhasini 89.
