ESPESIPIKASYON
Teknikal ya datos |
Saray katangian na suplay na kuryente: |
Suplay na kuryente: | 24V DC |
Kaplesan ya nauusar: | ≤ 35mA (24V DC, parad kada chnnel) |
Voltage range: | 16V~35V DC |
Saray katangian na input: |
Iloob so kaplesan: | ≤ 35mA (24V DC ) |
Say resistensya na alambre: | ≤ 15 Ω |
Input device: | SIS controller DI/DO signals |
Saray katangian na output: |
Bilang na saray akatongtong: | 2NO |
Materyal ya pitongtongan: | AgSnO2 |
Excontact fuse protection: | 5A (Internal) |
Kapasidad na kontak: | 5A/250V AC; 5A/24V DC |
Karukey na bilay na makina: | masulok ya 107panaon |
Saray katangian na panaon: |
Delay na pangi-on: | ≤ 30ms |
Delay-on de-energisation: | ≤ 30ms |
Panaon na pakabawi: | ≤ 30ms |
Mangiter na antikey ya pakaabala: | 20ms |
sertipikasyon ed kaligenan
Safety Integrity Level (SIL): | Say SIL3 et mitunosan ed IEC 61508 |
Hardware Fault Tolerance (HFT): | 0 et mitunosan ed IEC 61508 |
Safe failure fraction(SFF): | 99% so ontutumbok ed IEC 61508 |
Probabilidad na mapeligron pakaandi (PFHd): | 1.00E-09/h et mitunosan ed IEC 61508 |
StopCategory: | 0 et mitunosan ed EN 60204-1 |
10% ya average ya bilang na mapeligron inkagba na saray kabiangan (B10d): |
Rated Voltage 24VDC tan L/R=7ms : | Ie 2A 1A 0.5A |
Siklo 180,000 300,000 400,000 |
Rated Voltage 230VAC cos φ= Diad 0.4: | Ie 2A 1A 0.5A |
Siklo 500,000 580,000 600,000 |
Saray katangian na kaliberliber
Electromagnetic compatibility | mitunosan ed EN 60947, EN 61000-6-2, EN 61000-6-4 |
Kabetbet na yegyeg | 10Hz~55Hz |
Kabaleg na yegyeg | 0.35mm |
Temperatura na kaliberliber | -20 ℃~+60 ℃ |
Temperatura na panagsimpenan | -40 ℃~+85 ℃ |
Relatibon danum | 10% anggad 90% |
Katagey | ≤ 2000m |
Saray katangian na insulasyon
Say kaarawi na kuryente tan say kaarawi na panag-awit: | unong ed EN 60947-1 |
Lebel na sobran boltahe: | III |
Polusyon: | 2 |
Antas na proteksion: | IP20 |
Kabiskegan na insulasyon: | 1500V AC, 1 minuto |
Say boltahe na insulasyon: | 250V AC |
Rated impulse voltage: | 6000V (1.2/50us) |
Saray sukat ed paway
Kapal 114.5mm * katagey 99mm * kalapar 22.5mm
Diagram na wiring
Functional Block Diagram
Kaslakan ya aplikasyon
Diagram na wiring
(1) Say kable na instrumento et walaan na Pluggable connecting terminal;
(2) Say soft copper cross-sectional area na input side wire et nepeg ya mas baleg nen say 0.5mm2, tan say output side et nepeg ya mas baleg nen say 1mm2;
(3) Say akabantag a karukey na alambre et manga 8mm, ya aka-lock na M3 screws;
(4) Saray output contacts et nepeg ya mangiter na magenap ya proteksion na fuse;
(5) Say copper conductor et nepeg ya makasungdo ed temperaturan ag-onkulang ed 75 °C;
(6) Saray tornilyo ed terminal et nayarin pansengegan na ag-inkayadyari, pampainit, tan arum nira. Kanian, ipangasin ipeket itan unong ed nibaga ya torque. Terminal screw tightening torque 0.5Nm.
Pangipuesto
Saray safety relay et nepeg ya iiyan ed saray control cabinet ya walay proteksion ya ag-onkulang ed IP54.
Saray PH6002-2A series safety relays et amin et aka-install ya walay DIN35mm guide rails. Saray kundang ed pangipaalagey et singa onggendan
(1) Ipeket so tagey a sampot na instrumento ed guide rail;
(2) Itulak so abeban sampot na instrumento ed guide rail.
Panangibuyak
Pian naekal so instrument panel, tumboken irayan kundang:
(1)Ikarga so distornilyador ya say kalapar na payak to et 6mm o mas abeba ni ed metal ya kandado ya walad leksab na instrument panel.
(2)Itulak so distornilyador ed tagey legan ya ipaarap so metal ya kandado ed leksab. Sayan kiwas so mamaandi ed kandado.
(3)No akalukas so latch, maalwar ya iguygoy so instrument panel ed tagey tan paway ed guide rail.
No tumboken irayan kundang, maligen tan epektibon naekal so instrument panel ed guide rail parad panmintina odino inspeksion.
Atension
Nia so pakapatnagan na inter ya impormasyon:
(1)Panbalot na Produkto, Modelo na Label, tan Saray Espesipikasyon: I-verify no kasin say pakete na produkto, modelo na label, tan saray detalye et mipara ed saray nisulat ed kontrata na panagsaliw.
(2)Panalwar Antis ya I-install tan Usaren: Seguroen ya basaen a maong na saray manguusar so manual antis dan i-install tan usaren iray safety relay pian natalosan da ray totontonen ed panag-operate tan saray panag-alwar ed kaligenan.
(3)Impormasyon ed Kontak parad Teknikal a Suporta: Say Beijing Pinghe Technical Support Hotline, ya nayarin tawagan ed 400 711 6763, so nepeg ya kontaken parad antokaman a tepet odino tulong.
(4)Kaliberliber na Panag-instalar: I-install so safety relay ed sakey a control cabinet ya walay minimum ya proteksion na IP54 pian naprotektaan itan ed saray bengatla ed kaliberliber.
(5)Saray Kakaukolanen ed Suplay na Koryente: Say instrumento et mankikimey ed 24V ya suplay na kuryente. Importante ya ag mangusar na 220V AC power supply pian ag naderal odino naderal.
Say panumbok ed sarayan totontonen et ontulong pian naseguro so ligtas tan suston pangipuesto, panag-operate, tan panagmintina na safety relay system.
Panagmantini
(1) Ipangasin regular ya nengnengen no kasin say safety function na safety relay et walad maong a kondisyon, tan no wala ray pakapatnagan ya say circuit odino say orihinal et aderal odino alampasan;
(2) Ipangasin tumboken iray matukoy a totontonen ed kaligenan tan mankimey unong ed saray instruksion ed sayan instruction manual, ta no andi et nayarin pansengegan itan na makapatey iran aksidente odino pakaandi na totoo tan kaykayarian;
(3) Saray produkto et dinmalan ed malet ya inspeksion tan kalidad na panangontrol antis ya ontaynan ed pabrika. No nanengneng yon ag-onkikiwas a maong iray produkto tan mansuspetsa kayo ya walay depekto ed loob na module, mitalosan yon kontaken so sankaasinggeran ya ahente odino direktan kontaken so technical support hotline.
(4) Diad loob na anem taon manlapud petsa na pangiter, amin ya problema ed kalidad na produkto legan na normal ya panguusar et nepeg ya apigeren na Pinghe ya anggapoy bayar.
