BIAHMAITHIHNAK
Technical data |
Thazaang peknak sining: |
Thazaang peknak: | 24V DC |
A tu hmanmi: | ≤ 35mA (24V DC,chnnel pakhat cio caah) |
Voltage tlukruannak: | 16V~35V DC |
Luhtermi sining: |
Luhtermi current: | ≤ 35mA (24V DC ) |
Hri doh khawhnak: | ≤ 15 Ω |
Luhtermi thilri: | SIS controller DI/DO signals |
A chuakmi sining: |
Pehtlaihnak zat: | 2NO |
Pehtlaihnak thilri: | AgSnO2 |
Excontact fuse kilvennak: | 5A (Chunglei) |
Pehtlaihnak tuah khawhnak: | 5A/250V AC; 5A/24V DC |
Seh thilri nunchung: | nak tam7voi 10 |
Caan sining: |
On tlaihnak: | ≤ 30ms |
Thazaang tlawmternak ah tlaiternak: | ≤ 30ms |
Hramthawknak caan: | ≤ 30ms |
Caan tawite chung hnahnawhnak peknak: | 20ms |
himnak hngalhternak
Himnak Zumhtlaknak Tlukruannak (SIL): | SIL3 cu IEC 61508 he aa tlak |
Hardware palhnak tuar khawhnak (HFT): | 0 cu IEC 61508 he aa tlak |
A himmi tlamtlin lonak cheu (SFF): | 99% cu IEC 61508 he aa tlak |
A ttihnungmi tlamtlin lonak (PFHd): | 1.00E-09/h cu IEC 61508 he aa tlak |
StopCategory: | 0 cu EN 60204-1 he aa tlak |
10% a tlangpi in thilri hna i a ttihnungmi rawhnak caan (B10d): |
Rated Voltage 24VDC le L/R=7ms : | Ie 2A 1A 0.5A |
Cycle 180,000 300,000 400,000 |
Rated Voltage 230VAC cos φ= At 0.4: | Ie 2A 1A 0.5A |
Cycle 500,000 580,000 600,000 |
Pawngkam sining
Electromagnetic aa tlaknak | EN 60947, EN 61000-6-2, EN 61000-6-4 he aa tlak |
Hninhnak a tam ning | 10Hz~55Hz |
Hninhnak a ngan ning | 0.35mm |
Pawngkam lumnak | -20 ℃~+60 ℃ |
Chiahnak lumternak | -40 ℃~+85 ℃ |
Aa pehtlaimi lumternak | 10% in 90% tiang |
Sannak | ≤ 2000m |
Insulation sining
Electric thianhnak le tliknak hlatnak: | EN 60947-1 he aa tlak in |
Voltage tlukruannak: | III |
Thil thurhnawmhnak tlukruannak: | 2 |
Kilvennak tlukruannak: | IP20 |
Insulation thazaang: | 1500V AC, minutes 1 |
Rated insulation voltage: | 250V AC |
Rated impulse voltage: | 6000V (1.2/50us) |
Lenglei tahfung
A thuhnak 114.5mm * a sannak 99mm * a kauhnak 22.5mm
Hri hrennak hmanthlak
Riantuannak Block Diagram
A tlangpi in hmanmi
Hri hrennak hmanthlak
(1) Thilri hri nih Pluggable pehtlaihnak terminal a hman;
(2) A luhnak lei hri i a nemmi dar tthencheunak hmun cu 0.5mm2 nak tam a si lai, cun chuahnak lei cu 1mm2 nak tam a si lai;
(3) A langmi hri sauhnak cu 8mm hrawng a si, cucu M3 hri in khar a si;
(4) A chuakmi pehtlaihnak nih a za tawk in fuse kilvennak pehtlaihnak a pek a hau;
(5) Dar hri cu a tlawmbik 75 °C a simi pawngkam lumnak kha a tuar khawh a hau;
(6) Terminal screws nih riantuan ningcang lo, lumternak, tbk. a chuahter khawh. Cucaah, a langhtermi torque ning in hren. Terminal screw tightening torque 0.5Nm.
Chiahnak
Himnak hri pawl cu a tlawmbik IP54 kilvennak tlukruannak he control cabinet ah chiah ding a si.
PH6002-2A series himnak hri pawl cu DIN35mm lamhruaitu hri he an chiah dih hna. Install tuah ningcang cu a tanglei bantuk in a si
(1) Thilri cunglei donghnak kha lamhruaitu hri cungah hren;
(2) Thilri a tanglei bik kha lamhruaitu hri chungah hnuh.
Hrawh
Instrument panel chuah awk ah, a tanglei lamhruainak hna hi zulh:
(1)Instrument panel a tanglei bik ah a ummi thir hri chungah 6mm asiloah a tlawm deuh a kauhnak a ngeimi screwdriver kha khumh.
(2)Screwdriver kha cunglei ah hnuh law thir hri kha a tanglei lei ah hnuh. Hi thil tuahnak nih hin hrenhnak kha a thleh lai.
(3) Latch kha aa phoih tikah, thilri tthen kha ralring tein cunglei ah hnuh law lamhruaitu hri chungin chuahter.
Hi lamhruainak hna hi zulh in, zohkhenhnak asiloah zohfelnak caah lamhruaitu tlanglawng in thilri tthen kha him tein le ttha tein na chuah khawh.
Lungthin pek
Pekmi thawngpang fehternak cu hihi a si:
(1)Thilri chiahnak, min cazin model, le sining: Thilri chiahnak, min cazin model le sining hna cu cawknak hnatlaknak ah aa telmi he aa tlak maw ti kha zohfel.
(2)Installation le Hman Hmasa I Ralrinnak: Hmantu hna nih riantuannak lamhruainak le himnak ralrinnak hna hngalhthiam awkah himnak relay pawl kha chiah le hman hlan ah cauk kha ralring tein an rel hmasa lai ti kha i cinken.
(3)Thil lei bawmhnak caah pehtlaihnak: Beijing Pinghe thiamnak lei bawmhnak Hotline, 400 711 6763 ah pehtlaih khawhmi, biahalnak le bawmhnak caah pehtlaihnak tuah ding a si.
(4)Chiahnak Pawngkam: Pawngkam thil sining in huhphenh awkah a tlawmbik IP54 kilvennak tlukruannak he control cabinet chungah himnak relay kha chiah.
(5)Thawng Peknak Herhmi: Thilri cu 24V thazaang peknak in a rian a ttuan. A rawhnak le a ttha lonak hrial khawhnak ding caah 220V AC mei thazaang hman kha fek tein hrial a biapi.
Hi lamhruainak hna zulhnak nih hin himnak relay system himnak le ningcang tein chiahnak, riantuannak le zohkhenhnak a bawmh.
Fim
(1) Zaangfahnak tein himnak relay himnak riantuannak cu a ttha maw ttha lo, cun circuit asiloah a hramthawknak kha hrawh asiloah hrial a si timi hmelchunhnak a um maw um lo ti kha zungzal in zohfel;
(2) Aa pehtlaimi himnak phunglam kha zulh law hi lamhruainak cauk chung i lamhruainak ningin riantuan, cu lo ahcun thihnak tiang a chuahter khomi accident asiloah minung le thilri sunghnak a chuahter khawh;
(3) Thilri pawl cu sehzung in an chuah hlanah fek tein zohfelnak le tthatnak zohfelnak an tuah cang. Thilri pawl nih ttha tein rian an ttuan lo ti na hmuh i a chunglei module a palh tiah na lunghrinh ahcun, a nai bikmi agent kha pehtlaihnak tuah asiloah technical bawmhnak hotline kha direct in pehtlaihnak tuah.
(4) A kuat ni in kum ruk chung ah, a tlangpi in hman lio ah thilri tthatnak kong buainak vialte cu Pinghe nih man loin a remh lai.
