Shigarwar Analog
- Tashar Jiragen Sama
- Shingayen Tsaro da Aka Keɓe
- Masu Rarraba Sigina
- Na'urorin Kariya Masu Tasowa
- Tsaron jigilar kaya
- Modules na I/O masu Hankali da Aka Raba
- Ƙofofin Wayo Masu Hankali
- Masu Canja wurin Bayanan Masana'antu
- Masu Nazarin Dew Point na Kan layi
- Sassan Samun Bayanai
- Mai canza bayanai na HART
Jerin PHG-33TD
Bayani
Mai raba siginar shigarwar analog (fitarwa) jerin PHG-33TD zai iya ware kuma
canza siginar lantarki ko ƙarfin lantarki zuwa fitarwar siginar lantarki ko ƙarfin lantarki.
Ana iya keɓance sigogin shigarwa da fitarwa bisa ga
buƙatun mai amfani.
Wannan samfurin yana buƙatar a yi amfani da shi da kansa, da kuma samar da wutar lantarki,
An ware tashoshin shigarwa da fitarwa.
| Shigarwa | |
| Siginar shigarwa | Siginar DC (halin yanzu/ƙarfin lantarki) |
| Juriyar shigarwa | Nau'in ƙarfin lantarki ≥100kΩ |
| Nau'in yanzu ≤100Ω | |
| Fitarwa | |
| Siginar fitarwa | Siginar DC (halin yanzu/ƙarfin lantarki) |
| Juriyar Load | Juriyar kaya ta yanzu ≤500Ω |
| Juriyar nauyin wutar lantarki | |
| Sigogi na asali | |
| Ƙarfin wutar lantarki | 20~35VDC |
| Amfani da wutar lantarki | Fitowar yanzu |
| Fitowar ƙarfin lantarki | |
| Alamar LED | Kore: alamar wuta |
| Daidaiton fitarwa | 0.1%FS (Matsakaicin ƙima: 0.05%FS) |
| Lokacin amsawa | 5ms don isa 90% na ƙimar ƙarshe |
| Sigogin zafin jiki | Zafin aiki: -20℃ ~ +60℃, |
| Zafin ajiya: -40℃ ~ +80℃ | |
| Danshin da ya dace | 10% ~ 95% RH babu danshi |
| Ƙarfin rufin | ≥2000VAC/min (shigarwa/fitarwa/ƙarfin wutar lantarki) |
| Juriyar rufi | 100MΩ (500V DC) (tsakanin shigarwa/fitarwa/ samar da wutar lantarki) |
| Dacewar na'urar lantarki | GB/T 18268 (IEC 61326-1) |
| MTBF | 80000h |
| Bukatun waya | Sashen giciye ≥ 0.5mm2; Ƙarfin rufi ≥ 500V |
| Kayan aikin filin da suka dace | Tushen yanzu, tushen ƙarfin lantarki |
PHD-11TC-33A-23
