PHG-33TD series a ni

PHG-33TD series hian input 3 leh output 3 a nei a

Input: DC signal(current/voltage) a ni a, a chhuahna tur hmun leh a hmanna tur hmun a awm lo.
A chhuahna: DC signal(current/voltage) a ni.

Min rawn biak theih reng e

product chungchang chipchiar takin

Technical parameter a ni

Wiring diagram hmanga siam a ni

Certification pek a ni

Internet atanga thil lachhawng

A tlangpuiin

PHG-33TD series analog input (output) signal isolator hian a isolate thei a,

current emaw voltage signal emaw chu current emaw voltage signal output ah a chantir thin.

Input leh output parameter te chu a zirin a customize theih a ni

user mamawh a ni.

He product hi independent taka power pek a ngai a, power supply, .

input leh output terminal te chu isolated a ni.

Input a ni
Signal input a ni	DC signal(current/voltage) a awm thei lo.
Input a awm lo	Voltage chi hrang hrang ≥100kΩ a ni
Input a awm lo	Tuna a chi hrang hrang ≤100Ω
Output a ni
A chhuahna signal a ni	DC signal(current/voltage) a awm thei lo.
Load Resistance a ni	Tuna load resistance ≤500Ω a ni
Load Resistance a ni	Voltage load resistance
Parameter bulpui ber berte
Supply voltage a awm	20~35VDC a ni
Power hmanralna a ni	Tuna output
Power hmanralna a ni	Voltage atanga chhuak
LED hmanga entir a ni	Green: power chhinchhiahna a ni
Output dik tak a ni	0.1%FS (A hlutna tlangpui: 0.05%FS) a ni.
Chhanna hun pek hun	5ms chhungin final value 90% a thleng thei
Temperature parameter hrang hrangte	Hnathawh lumna: -20°C ~ +60°C,
Temperature parameter hrang hrangte	A dahna hmun: -40°C ~ +80°C
Relative humidity a awm lo	10%~95% RH ah chuan condensation a awm lo
Insulation chakna a ni	≥2000VAC/min (input/output/power supply) a ni ang.
Insulation a do theih loh	100MΩ (500V DC) (input/output/power supply inkar) a ni.
Electromagnetic nena inmil theihna	GB/T 18268 (IEC 61326-1) hmanga siam a ni.
MTBF	80000h a ni
Wire mamawh a ni	cross section ≥ 0.5mm2 a ni a; Insulation chakna ≥ 500V a ni
Field hmanrua hman tur	Current source, voltage chhuahna hmun