PHG-11TA series / PHG-12TA series hmanga siam a ni

PHG-11TA series 1 input 1 chhuahna

PHG-12TA series 1 ah hian input 2 a awm a

Input: AC signal a ni
A chhuahna: DC signal a ni

Min rawn biak theih reng e

product chungchang chipchiar takin

Technical parameter a ni

Wiring diagram hmanga siam a ni

Certification pek a ni

Internet atanga thil lachhawng

A tlangpuiin

Power transmitter hian AC signal input a nei a, AC signal chu input a ni a, DC signal chu isolation hnuah output a ni.
He product hi independent taka power pek a ngai a, power supply,input leh output terminal te pawh isolated a ni.

PHG-11TA series PHG-12TA series hmanga siam a ni

A chiang zawk
Input a ni
Signal input a ni	AC signal a ni
Output a ni
A chhuahna signal a ni	DC signal a ni
Load theihna a awm	Tuna load resistance ≤500Ω a ni Voltage load resistance
Parameter bulpui ber berte
Supply voltage a awm	20~35V DC a ni
Power hmanralna a ni	Current output
Output dik tak a ni	0.2%FS a ni
Chhanna hun pek hun	1s
Temperature a inthlak danglam thin	0.02%FS/°C a ni
Temperature parameter hrang hrangte	Hnathawh lumna: -20°C ~ +60°C, A dahna hmun: -40°C ~ +80°C
Relative humidity a awm lo	10%~95% RH ah chuan condensation a awm lo
Insulation chakna a ni	≥1500VAC/min (input/output/power supply) a ni ang.
Insulation a do theih loh	100MΩ (500V DC) (input/output/power supply inkar) a ni.
Electromagnetic nena inmil theihna	GB/T 18268 (IEC 61326-1) hmanga siam a ni.
MTBF	80000h a ni
Wire mamawh a ni	Cross section≥ 0.5mm2 a ni a; Insulation chakna ≥ 500V a ni
Field hmanrua hman tur	Tuna source awm mek

PHG-11TA series PHG-12TA series 1. A chhuah dawn chuan a chhuak leh ta a

Note: 1. PHG-11TA series hian output 2 part 2 a huam lo a, power rail power supply hi optional function a ni. User te chuan order an tih hian power supply mode an tarlang a ngai a ni. Khawngaihin phek 89-a attachment hi en la.