Analog Input a ni

Products category hrang hrang

Thil siam chhuah langsar tak takte

PH-Co series RS422 Control Net bus data optical transceiver hmanga siam a ni

PH-Co series RS422 Control Net bus data optical hmanga siam a ni a, a man pawh a to hle.

PHM-7230 Ex Intrinsically Safe Isolated IO Modules fing tak tak te chu a awm a

PHM-7230 Ex Intrinsically Safe Isolated a ni a, a chhuahna tur hmun leh a hmanna tur hmun chu a inthlau hle.

PHM-7540 Channel pali nei analog input module a ni

PHG-11TE Series a ni

Input: Wire 2, wire 3 transmitter emaw current source signal emaw a awm thei
A chhuahna: DC signal(current/voltage) a ni.
1 input 1 output a ni

Min rawn biak theih reng e

product chungchang chipchiar takin

Technical parameter a ni

Wiring diagram hmanga siam a ni

Certification pek a ni

Internet atanga thil lachhawng

A tlangpuiin

Analog input signal isolator hian wire pahnih emaw pathum emaw 4~20mA emaw current source signal te chu a isolate thei a, current emaw voltage signal output ah a chantir thei bawk. Input leh output parameter te hi user mamawh ang zela siam theih a ni. He product hian independent power supply a mamawh a, power supply, input leh output terminal te chu a inthen darh vek a ni.

1. 1. A rilru a hah lutuk chuan a rilru a buai em em a

Input a ni
Signal input a ni	Wire pahnih emaw pathum emaw system 4~20mA emaw current source signal emaw a ni thei
Distribution voltage a ni	≥18V a ni
Input a awm lo	≤100Ω a ni
Output a ni
A chhuahna signal a ni	DC signal(current/voltage) a awm thei lo.
Load Resistance a ni	Tuna load resistance ≤500Ω Voltage load resistance
Parameter bulpui ber berte
Supply voltage a awm	20~35V DC a ni
Power hmanralna a ni	Current output
LED hmanga entir a ni	Green: power chhinchhiahna a ni
Output dik tak a ni	0.1%FS (A hlutna tlangpui: 0.05%FS) a ni.
Chhanna hun pek hun	5ms chhungin final value 90% a thleng thei
Temperature parameter hrang hrangte	A hnathawhna hmun: -20°C ~ +60°C, A dahna hmun: -40°C ~ +80°C
Relative humidity a awm lo	10%~95% RH ah chuan condensation a awm lo
Insulation chakna a ni	≥2000VAC/min (input/output/power supply) a ni ang.
Insulation a do theih loh	100MΩ (500V DC) (input/output/power supply inkar) a ni.
Electromagnetic nena inmil theihna	GB/T 18268 (IEC 61326-1) hmanga siam a ni.
MTBF	80000h a ni
Wire mamawh a ni	Cross section≥ 0.5mm2 a ni a; Insulation chakna ≥ 500V a ni
Field hmanrua hman tur	Wire pahnih emaw pathum emaw hmanga transmitter emaw current source emaw

PHG-11TE PHG-12TE hmanga siam a ni

Note: 1. PHG-11TE series hian output 2 part 2 a huam lo a, power rail power supply hi optional function a ni. User te chuan order an tih hian power supply mode an tarlang a ngai a ni. Khawngaihin phek 89-a attachment hi en la.

PHG-11TE series a ni

PHG-11TE series a ni

PH-Co series RS422 Control Net bus data optical hmanga siam a ni a, a man pawh a to hle.

PHM-7230 Ex Intrinsically Safe Isolated a ni a, a chhuahna tur hmun leh a hmanna tur hmun chu a inthlau hle.

PHM-7540 Channel pali nei analog input module a ni

PHD-22HT-11 a ni

PHG-12TE series a ni

PHL-T5-L2-EX tih a ni

PHL-TA-20 a ni

PHL-T5-L3-EX tih a ni

PHL-T5-L4-EX tih a ni

PHD-11TD-21 a ni

PHG-11TE Series a ni

Note: 1. PHG-11TE series hian output 2 part 2 a huam lo a, power rail power supply hi optional function a ni. User te chuan order an tih hian power supply mode an tarlang a ngai a ni. Khawngaihin phek 89-a attachment hi en la.

PHG-12TD Series a ni

PHG-11ND-11 / PHG-22ND-1111 hmanga siam a ni

PHG-13TD Series a ni

PHG-33TD series a ni

PHG-11NE-52/PHG-22NE-5252 hmanga tih theih a ni

PHG-11TH/PHG-12TH hmanga tihchhuah a ni

PH-Co series RS422 Control Net bus data optical hmanga siam a ni a, a man pawh a to hle.

PHM-7230 Ex Intrinsically Safe Isolated a ni a, a chhuahna tur hmun leh a hmanna tur hmun chu a inthlau hle.

PHM-7540 Channel pali nei analog input module a ni

PHD-22HT-*1*1 a ni

PHG-12TE series a ni

PHL-T5-L2-EX tih a ni

PHL-TA-20 a ni

PHL-T5-L3-EX tih a ni

PHL-T5-L4-EX tih a ni

PHD-11TD-21 a ni

PHG-11TE Series a ni

Note: 1. PHG-11TE series hian output 2 part 2 a huam lo a, power rail power supply hi optional function a ni. User te chuan order an tih hian power supply mode an tarlang a ngai a ni. Khawngaihin phek 89-a attachment hi en la.

PHD-22HT-11 a ni