Analog Input a Wɔde Di Dwuma
- Terminal Board no yɛ adwuma
- Ahobammɔ Akwanside ahorow a Atew ne Ho
- Nneɛma a Wɔde Tew Nsɛnkyerɛnne Ho
- Mfiri a Ɛbɔ Surge Ho Ban
- Ahobammɔ Relays
- I/O Modules a Ɛyɛ Nyansafo a Wɔatew Wɔn Ho
- Apon a Ɛyɛ Nyansa
- Nnwumayɛbea Data Optical Transceivers
- Intanɛt so Dew Point Analyzers
- Data a Wɔde Nya Nneɛma
- HART data a wɔde dannan nneɛma
01. Ɔde ne nsa kyerɛɛ ne so02. Ɔde ne nsa kyerɛɛ ne so03. Ɔde ne nsa kyerɛɛ ne so04. Ɔde ne nsa kyerɛɛ ne so05. Ɔde ne nsa kyerɛɛ ne so
PHG-11TE Ntoatoaso
Nsɛm a wɔaka abom
Analog input signal isolator no betumi atew ne ho na adan abien- anaa abiɛsa-wire 4 ~ 20mA anaa mprempren fibea nsɛnkyerɛnne akɔ mprempren anaa voltage sɛnkyerɛnne output. Wobetumi ayɛ input ne output parameters no sɛnea nea ɔde di dwuma no ahiade te. Saa ade yi hwehwɛ ahoɔden a ɛde ne ho, tumi a wɔde ma, input ne output terminals no atew ne ho wɔ wɔn ho wɔn ho ntam.
| Nsɛm a wɔde hyɛ mu | |
| Input sɛnkyerɛnne | Mmienu anaa abiɛsa-wire nhyehyɛe 4 ~ 20mA anaa mprempren fibea sɛnkyerɛnne |
| Nkyekyɛmu ahoɔden | ≥18V na ɛwɔ hɔ |
| Input a ɛko tia | ≤100Ω na ɛyɛ |
| Nea efi mu ba | |
| Output sɛnkyerɛnne | DC sɛnkyerɛnne(mprempren/voltage) . |
| Adesoa a Ɛko Tia | Mprempren adesoa a ɛko tia ≤500Ω Voltage adesoa a ɛko tia |
| Mfitiaseɛ parameters | |
| Nneɛma a wɔde ma no voltage | 20 ~ 35V DC na ɛyɛ adwuma |
| Tumi a wɔde di dwuma | Mprempren output |
| LED a ɛkyerɛ sɛnea nneɛma te | Green: tumi kyerɛwtohɔ |
| Output a ɛyɛ pɛpɛɛpɛ | 0.1%FS (Nea ɛtaa ba: 0.05%FS) . |
| Mmuae bere | 5ms na ɛbɛduru 90% wɔ boɔ a ɛtwa toɔ no mu |
| Ɔhyew ho nsɛnkyerɛnne | Adwumayɛ hyew: -20°C ~ +60°C, Ɔhyew a wɔkora so: -40°C ~ +80°C |
| Nsu a ɛyɛ nwini kakra | 10% ~ 95% RH biara nni hɔ a ɛyɛ nwini |
| Insulation ahoɔden | ≥2000VAC / min (input / output / tumi a wɔde ma) |
| Insulation a ɛko tia | 100MΩ (500V DC) (ntam input / output / tumi a wɔde ma) |
| Electromagnetic a ɛne ne ho hyia | GB/T 18268 (IEC 61326-1) Ɔde ne nsa kyerɛɛ ne so. |
| MTBF | 80000h na ɛyɛ |
| Wire ahwehwɛde ahorow | Ntrɛwmu≥ 0.5mm2; Insulation ahoɔden ≥ 500V |
| Mfiri a wɔde yɛ afuw a ɛfata | Nhama abien anaa abiɛsa transmitter anaa mprempren fibea |
Hyɛ no nsow: 1. PHG-11TE series no nka output 2 part 2. Tumi a wɔde ma wɔ tumi keteke kwan no yɛ adwuma a wobetumi apaw. Ɛsɛ sɛ wɔn a wɔde di dwuma no kyerɛ ɔkwan a wɔfa so de anyinam ahoɔden ma bere a wɔrekra nneɛma no. Yɛsrɛ sɛ hwɛ attachment a ɛwɔ kratafa 89 no.
PHG-11TE a ɛtoatoa so
PHG-11TE a ɛtoatoa so