Analog Input a Wɔde Di Dwuma

Nneɛma a Wɔyɛ no Akuw

Nneɛma a Wɔada no Adi

01. Ɔde ne nsa kyerɛɛ ne so02. Ɔde ne nsa kyerɛɛ ne so03. Ɔde ne nsa kyerɛɛ ne so04. Ɔde ne nsa kyerɛɛ ne so05. Ɔde ne nsa kyerɛɛ ne so

PHG-11ND-11 / PHG-22ND-1111

Analogue input sɛnkyerɛnne isolators(Loop ahoɔden) .

PHG-11ND-11 series 1 a wɔde hyɛ mu ne 1 a wɔde fi mu
PHG-22ND-1111 series 2 a wɔde hyɛ mu ne 2 a wɔde fi mu

Nneɛma a wɔde hyɛ mu: 4 ~ 20mA
Nneɛma a ɛba: 4 ~ 20mA

Wo ne yɛn nkasa

nneɛma a wɔyɛ ho nsɛm

Mfiridwuma mu parameter

Wiring mfonini a wɔde ayɛ

Adansedi krataa

Twe

Nsɛm a wɔaka abom

DC signal isolator, circuit no nya tumi ahoɔden fi sɛnkyerɛnne no mu

input awiei, yiyi na ɛdannan 4 ~ 20mA mprempren sɛnkyerɛnne wɔ input no so

awiei kɔ 4 ~ 20mA mprempren sɛnkyerɛnne na soma no kɔ output awiei.

Saa ade yi nhia anyinam ahoɔden a ɛde ne ho, na...

input ne output no yɛ nea wɔatew wɔn ho.

Nsɛm a wɔde hyɛ mu
Input sɛnkyerɛnne	4 ~ 20mA na ɛyɛ
Nsɛnkyerɛnneɛ mu ahoɔden	12 ~ 30V DC na ɛwɔ hɔ
Nea efi mu ba
Output sɛnkyerɛnne	4 ~ 20mA na ɛyɛ
Adesoa a Ɛko Tia	RL≤(Ui-6)/0.02 na ɛwɔ hɔ
Mfitiaseɛ parameters
Output a ɛyɛ pɛpɛɛpɛ	0.2%FS na ɛwɔ hɔ
Mmuae bere	10ms na ɛyɛ
Ɔhyew a ɛkɔ soro	0.01%FS/°C na ɛwɔ hɔ
Ɔhyew ho nsɛnkyerɛnne	Adwumayɛ hyew: -20°C ~ +60°C, Ɔhyew a wɔkora so: -40°C ~ +80°C
Nsu a ɛyɛ nwini kakra	10% ~ 95% RH biara nni hɔ a ɛyɛ nwini
Insulation ahoɔden	≥1500VAC / min (input/output) .
Insulation a ɛko tia	100MΩ (500V DC) (wɔ input/output ntam) .
Electromagnetic a ɛne ne ho hyia	GB/T 18268 (IEC 61326-1) Ɔde ne nsa kyerɛɛ ne so.
MTBF	80000h na ɛyɛ
Wire ahwehwɛde ahorow	Ntrɛwmu≥ 0.5mm2; Insulation ahoɔden ≥ 500V
Mfiri a wɔde yɛ afuw a ɛfata	Mprempren fibea