- Tashar Jiragen Sama
- Shingayen Tsaro da Aka Keɓe
- Masu Rarraba Sigina
- Na'urorin Kariya Masu Tasowa
- Tsaron jigilar kaya
- Modules na I/O masu Hankali da Aka Raba
- Ƙofofin Wayo Masu Hankali
- Masu Canja wurin Bayanan Masana'antu
- Masu Nazarin Dew Point na Kan layi
- Sassan Samun Bayanai
- Mai canza bayanai na HART
PH6202-2A2B-N
Bayani
PH6202-2A2B-N wani tsarin sarrafa jigilar kaya ne mai aminci wanda ya dace da shigar da labulen hasken aminci na nau'in NPN, tare da lambobin fitarwa guda biyu da aka saba buɗewa (NO) da lambobin fitarwa guda biyu da aka saba rufewa (NC) don jigilar kaya. Yana goyan bayan aikin tashoshi biyu kuma ana iya sake saita shi da hannu ko ta atomatik.
Bayanan fasaha
| Halayen samar da wutar lantarki | |
| Tushen wutan lantarki | 24V DC |
| Amfani da shi a yanzu | ≤90mA(24V DC) |
| Juriyar ƙarfin lantarki | 0.85～1.1 |
| Sifofin shigarwa | |
| Juriyar waya | ≤ 15 Ω |
| Shigarwar wutar lantarki | ≤50mA(24V DC) |
| Na'urar shigarwa | Na'urorin hasken NPN irin su |
| Adadin lambobin sadarwa | 2NO+2NC |
| Kayan hulɗa | AgSnO2+0.2 μmAu |
| Nau'in tuntuɓar | Jagorar da aka tilasta |
| Kariyar fis ɗin hulɗa | 10A gL/gG, NEOZED (yawanci yana buɗewa) 6A gL/gG, NEOZED (wanda yawanci aka rufe da lamba) |
| Ƙarfin sauyawa (EN 60947-5-1) | AC-15,5A/230V; DC-13,5A/24V |
| Tsawon rayuwar injina | fiye da sau 10⁷ |
| Halayen Lokaci | |
| Jinkirin kunnawa | |
| Sake saitin atomatik | ≤300ms |
| Sake saitin hannu | ≤150ms |
| Jinkirin rage kuzari | |
| Aikin dakatar da gaggawa | ≤30ms |
| Lalacewar wutar lantarki | ≤100ms |
| Lokacin murmurewa | |
| Aikin dakatar da gaggawa | ≤ 30ms |
| Lalacewar wutar lantarki | ≤100ms |
| Katsewar bayarwa ta ɗan gajeren lokaci | 20ms |
| takardar shaidar aminci | |
| Matakin Aiki (PL) | Don Allah a bi ka'idojin EN ISO 13849 |
| Nau'in Tsaro (Cat.) | Tsarin Cat.4 ya dace da EN ISO 13849 |
| Lokacin Aiki (TM) | Shekaru 20 sun dace da EN ISO 13849 |
| Rufewar ganewar asali (DC/DCavg) | Kashi 99% sun yi daidai da EN ISO 13849 |
| Matakin Ingancin Tsaro (SIL) | SIL3 ya dace da IEC 61508, IEC 62061 |
| Juriyar Lalacewar Kayan Aiki (HFT) | 1 ya dace da IEC 61508, IEC 62061 |
| Kashi mai aminci na gazawar (SFF) | Kashi 99% sun dace da IEC 61508, IEC 62061 |
| Yiwuwar gazawar haɗari (PFHd) | 3.09E-10/h ya dace da IEC 61508, IEC 62061 |
| Tsaida Rukunin | 0 ya yi daidai da EN 60204-1 |
| Matsakaicin adadin zagayowar gazawar haɗari na abubuwan haɗin kai 10% (B10d) | |
| DC13, Ue = 24V | Ie 5A 2A 1A Kekuna 300,000 2,000,000 7,000,000 |
| AC15, Ue = 230V | Ie 5A 2A 1A Kekuna 200,000 230,000 380,000 |
| Halayen Muhalli | |
| Dacewar na'urar lantarki | EN 60947, EN 61000-6-2, EN 61000-6-4 |
| Mitar girgiza | 10Hz~55Hz |
| Girman girgiza | 0.35mm |
| Yanayin zafi na yanayi | -20 ℃~+60 ℃ |
| Zafin ajiya | -40 ℃~+85 ℃ |
| Danshin da ya dace | 10% zuwa 90% |
| Tsayi | ≤ mita 2000 |
| Halayen rufi | |
| Tsaftace wutar lantarki da nisan da ke ratsawa | ya yi daidai da EN 60947-1 |
| Matsayin ƙarfin lantarki fiye da kima | na uku |
| Matsayin gurɓatawa | 2 |
| Matakin kariya | IP20 |
| Ƙarfin rufin | 1500V AC, minti 1 |
| Ƙwaƙwalwar rufin da aka ƙima | 250V AC |
| Ƙarfin wutar lantarki mai ƙima | 6000V (1.2/50us) |
Girman waje
Zane-zanen Toshe-toshe na Aiki
Aikace-aikacen yau da kullun
Tsarin wayoyi
(1) Wayoyin kayan aikin suna amfani da tashar haɗin da za a iya haɗawa da ita;
(2) Yankin haɗin gwiwar jan ƙarfe mai laushi na wayar gefen shigarwa dole ne ya fi 0.5mm2, kuma ɓangaren fitarwa dole ne ya fi 1mm2;
(3) Tsawon wayar da aka fallasa ya kai kusan mm 8, wanda aka kulle shi da sukurori na M3;
(4) Dole ne hulɗar fitarwa ta samar da isassun hanyoyin kariya daga fis;
(5) Mai sarrafa jan ƙarfe dole ne ya jure yanayin zafi na akalla 75 ℃;
(6) Sukurin tashar na iya haifar da rashin aiki, dumama, da sauransu. Saboda haka, don Allah a matse shi bisa ga ƙayyadadden ƙarfin juyi. Ƙarfin juyi mai matsewa na tashar 0.5Nm.
Shigarwa
Ya kamata a sanya na'urorin jigilar kaya na tsaro a cikin kabad masu kula da kayan aiki tare da aƙalla matakin kariya na IP54. A halin yanzu, shigarwa da amfani ya kamata su bi ƙa'idodin da suka dace na GB 5226.1-2019 "Tsaron Inji da Wutar Lantarki - Kayan Aikin Inji da Wutar Lantarki - Kashi na 1: Sharuɗɗan Fasaha na Gabaɗaya".
An shigar da na'urorin jigilar kaya na PH6202-2A2B-N duk da layin jagora na DIN35mm. Matakan shigarwa sune kamar haka
(1) Manne ƙarshen saman kayan aikin a kan layin jagora;
(2) Tura ƙarshen ƙasan kayan aikin zuwa cikin layin jagora.
Rushewa
Saka sukudireba (faɗin ruwan wuka ≤ 6mm) a cikin maƙallin ƙarfe a ƙasan ɓangaren kayan aiki;
Tura sukudireba sama sannan ka danna makullin ƙarfe zuwa ƙasa;
Ja ɓangaren kayan aikin sama da kuma fitar da shi daga layin jagora.
Hankali
Da fatan za a tabbatar ko marufin samfurin, samfurin lakabin samfur, da ƙayyadaddun bayanai sun yi daidai da kwangilar siyan;
Kafin shigarwa da amfani da na'urorin watsawa na tsaro, a hankali a karanta wannan jagorar;
Idan kuna da wasu tambayoyi, tuntuɓi Beijing Pinghe Technical Support Hotline a 400 711 6763;
Ya kamata a sanya na'urar auna tsaro a cikin kabad mai kariya aƙalla matakin kariya na IP54;
An haramta samar da wutar lantarki ta DC mai karfin 24V ga kayan aiki, da kuma amfani da wutar lantarki ta AC mai karfin 220V;
Gyara
(1) Da fatan za a riƙa duba ko aikin aminci na relay ɗin tsaro yana cikin kyakkyawan yanayi, da kuma ko akwai alamun cewa an yi wa da'irar ko asalin ko kuma an kewaye ta;
(2) Da fatan za a bi ƙa'idodin tsaro masu dacewa kuma a yi aiki bisa ga umarnin da ke cikin wannan littafin jagora, in ba haka ba zai iya haifar da haɗari masu haɗari ko asarar ma'aikata da dukiyoyi;
(3) An yi bincike mai zurfi da kuma kula da inganci kafin a bar masana'antar. Idan ka ga cewa kayayyakin ba sa aiki yadda ya kamata kuma kana zargin cewa na'urar cikin gida tana da matsala, tuntuɓi wakilin da ke kusa ko kuma ka tuntuɓi kai tsaye ta layin tallafi na fasaha 400 711 6763.
(4) Cikin shekaru shida daga ranar isarwa, duk wata matsala ta ingancin samfura yayin amfani da su na yau da kullun za a gyara ta Pinghe kyauta.