- Terminal Board no yɛ adwuma
- Ahobammɔ Akwanside ahorow a Atew ne Ho
- Nneɛma a Wɔde Tew Nsɛnkyerɛnne Ho
- Mfiri a Ɛbɔ Surge Ho Ban
- Ahobammɔ Relays
- I/O Modules a Ɛyɛ Nyansafo a Wɔatew Wɔn Ho
- Apon a Ɛyɛ Nyansa
- Nnwumayɛbea Data Optical Transceivers
- Intanɛt so Dew Point Analyzers
- Data a Wɔde Nya Nneɛma
- HART data a wɔde dannan nneɛma
PH6202-2A2B-N na ɛwɔ hɔ
Nsɛm a wɔaka abom
PH6202-2A2B-N yɛ ahobammɔ relay control module a ɛfata ma NPN type ahobammɔ kanea curtain input, a 2 taa bue (NO) ahobammɔ output nkitahodi ne 2 daa to mu (NC) aboafo output nkitahodi ma ahobammɔ relays. Ɛboa dual channel adwumayɛ na wobetumi de nsa anaasɛ automatically reset.
Mfiridwuma ho nsɛm
| Tumi a wɔde ma no su ahorow | |
| Tumi a wɔde ma | 24V DC na ɛwɔ hɔ |
| Mprempren nneɛma a wɔde di dwuma | ≤90mA (24V DC) na ɛwɔ hɔ. |
| Voltage a wɔde gyina ano | 0.85～1.1 |
| Input su ahorow | |
| Wire a ɛko tia | ≤ 15 Ω na ɛyɛ |
| Input mprempren | ≤50mA (24V DC) na ɛwɔ hɔ. |
| Input afiri a wɔde hyɛ mu | NPN type hann hann mfiri ahorow |
| Nnipa dodow a wo ne wɔn di nkitaho | 2NO+2NC na ɛwɔ hɔ |
| Nsɛm a wɔde di nkitaho | AgSnO2 + 0.2 μmAu na ɛwɔ hɔ |
| Contact type | Akwankyerɛ a wɔhyɛ obi ma |
| Contact fuse ahobammɔ | 10A gL/gG, NEOZED (wɔtaa bue nkitahodi) . 6A gL/gG,NEOZED(mpɛn pii no wɔatoto nkitahodi) |
| Nsakraeɛ tumi(EN 60947-5-1) . | AC-15,5A/230V;DC-13,5A/24V |
| Mfiri nkwa nna a wɔde yɛ adwuma | bɛboro mpɛn 107 |
| Bere su ahorow | |
| Switch-on a ɛkyɛ | |
| Automatic reset a wɔde yɛ adwuma | ≤300ms na ɛwɔ hɔ |
| Manual Reset | ≤150ms na ɛwɔ hɔ |
| Delay-on de-energisation a wɔde bɛma | |
| Oprehyɛn a wɔde gyina ntɛm ara | ≤30ms na ɛyɛ |
| Tumi a ɛyɛ mmerɛw | ≤100ms na ɛwɔ hɔ |
| Bere a wɔde bɛma obi ho atɔ no | |
| Oprehyɛn a wɔde gyina ntɛm ara | ≤ 30ms na ɛyɛ |
| Tumi a ɛyɛ mmerɛw | ≤100ms na ɛwɔ hɔ |
| Supply bere tiaa bi a wɔde twaa mu | 20ms na ɛyɛ |
| ahobammɔ ho adansedi krataa | |
| Adwumayɛ mu gyinabea (PL) . | PLe ne EN ISO 13849 hyia |
| Ahobammɔ Ho Ɔfã (Cat.) . | Cat.4 no ne EN ISO 13849 hyia |
| Adwuma Bere (TM) . | Mfeɛ 20 ne EN ISO 13849 hyia |
| Nhwehwɛmu a wɔde tua ho ka (DC/DCavg) . | 99% ne EN ISO 13849 hyia |
| Ahobanbɔ mudi mudi mu gyinapɛn (SIL) . | SIL3 ne IEC 61508,IEC 62061 hyia |
| Hardware Mfomso Tolerance(HFT) . | 1 ne IEC 61508,IEC 62061 hyia |
| Ahobammɔ huammɔdi fã(SFF) . | 99% ne IEC 61508,IEC 62061 hyia |
| Sɛnea ebetumi aba sɛ ebetumi adi huammɔ a asiane wom (PFHd) . | 3.09E-10/h ne IEC 61508,IEC 62061 hyia |
| GyinaCategory no mu | 0 no ne EN 60204-1 hyia |
| 10% sɛ wɔkyekyem pɛpɛɛpɛ a, dodow a asiane wom di huammɔdi kyinhyia ahorow a ɛfa nneɛma a ɛwom no ho (B10d) . | |
| DC13,Ue=24V na ɛwɔ hɔ | Ɛne sɛ 5A 2A 1A Kyinhyia 300,000 2,000,000 7,000,000 |
| AC15,Ue=230V na ɛwɔ hɔ | Ɛne sɛ 5A 2A 1A Kyinhyia 200,000 230,000 380,000 |
| Nneɛma a atwa yɛn ho ahyia no su | |
| Electromagnetic a ɛne ne ho hyia | ɛne EN 60947, EN 61000-6-2, EN 61000-6-4 hyia |
| Mpɛn dodow a ɛwosow | 10Hz ~ 55Hz na ɛwɔ hɔ |
| Wosow amplitude a ɛyɛ den | 0.35mm na ɛwɔ hɔ |
| Ɔhyew a atwa yɛn ho ahyia | -20 °C ~ + 60 °C na ɛwɔ hɔ |
| Ɔhyew a wɔde sie | -40 °C ~ + 85 °C na ɛwɔ hɔ |
| Nsu a ɛyɛ nwini kakra | 10% kosi 90% . |
| Ɔsorokɔ a ɛwɔ soro | ≤ 2000m na ɛwɔ hɔ |
| Insulation su ahorow | |
| Electrical clearance ne creepage kwan a ɛda ntam | ɛne EN 60947-1 hyia |
| Overvoltage level a ɛyɛ den | III |
| Efĩ dodow a ɛwɔ hɔ | 2. 2. |
| Ahobammɔ gyinabea | IP20 na ɛwɔ hɔ |
| Insulation ahoɔden | 1500V AC, simma 1 |
| Rated insulation ahoɔden a ɛwɔ mu | 250V AC na ɛyɛ adwuma |
| Rated impulse ahoɔden a wɔde yɛ adwuma | 6000V (1.2/50us) na ɛwɔ hɔ. |
Abɔnten so nsusuwii ahorow
Dwumadie Block Mfonini
Dwumadi a wɔtaa de di dwuma
Wiring mfonini a wɔde ayɛ
(1) Adwinnade no wiring gye Pluggable nkitahodi terminal ;
(2) Ɛsɛ sɛ kɔbere a ɛyɛ mmerɛw no cross-sectional area a ɛwɔ input side wire no mu no boro 0.5mm2, na ɛsɛ sɛ output side no boro 1mm2;
(3) Waya no tenten a ɛda adi no bɛyɛ 8mm, a wɔde M3 nkɔnsɔnkɔnsɔn abɔ mu;
(4) Ɛsɛ sɛ output contacts no ma fuse ahobammɔ nkitahodi a ɛdɔɔso;
(5) Ɛsɛ sɛ kɔbere nhama no gyina ɔhyew a atwa yɛn ho ahyia a anyɛ yiye koraa no ɛyɛ 75 °C ano;
(6) Terminal screws betumi ama misoperation, ɔhyew, ne nea ɛkeka ho Enti, yɛsrɛ sɛ tighten no sɛnea torque a wɔakyerɛ. Terminal skru a ɛyɛ den torque 0.5Nm.
Installation a wɔde hyɛ mu
Ɛsɛ sɛ wɔde ahobammɔ relays si control cabinets a anyɛ yiye koraa no IP54 ahobammɔ level.Meanwhile, ɛsɛ sɛ wɔde si hɔ na wɔde di dwuma no di nhyehyɛe a ɛfa ho a ɛwɔ GB 5226.1-2019 "Mfiri ne Electrical Ahobammɔ - Mfiri ne Electrical Equipment - Ɔfã 1: General Technical Conditions" no so.
PH6202-2A2B-N series ahobammɔ relays no nyinaa yɛ nea wɔde DIN35mm akwankyerɛ keteke kwan. Anamɔn a wɔfa so de instɔlehyɛn no te sɛ nea edidi so yi
(1) Fa adwinnade no atifi awiei no hyɛ keteke kwan a ɛkyerɛ kwan no so;
(2) Pia adwinnade no ase awiei kɔ akwankyerɛ keteke no mu.
Wɔrebubu agu
Fa skrudraiver (blade trɛw ≤ 6mm) hyɛ dade latch a ɛwɔ adwinnade no ase awiei no mu;
Pia skrudraever no kɔ soro na fa dade a wɔde hyɛ mu no kɔ fam;
Twe mfiri no kɔ soro na fi akwankyerɛ keteke kwan no so.
Adwene nsisoɔ
Yɛsrɛ sɛ hwɛ sɛ ebia nneɛma a wɔde ahyɛ mu, nneɛma a wɔakyerɛw so, ne nea wɔakyerɛw no ne adetɔ apam no hyia anaa;
Ansa na wode safety relays bɛhyɛ mu na wode adi dwuma no, kenkan nhoma yi yiye;
Sɛ wowɔ nsɛmmisa bi a, yɛsrɛ wo, di Beijing Pinghe Mfiridwuma Mmoa Hotline no nkitaho wɔ 400 711 6763;
Ɛsɛ sɛ wɔde ahobammɔ relay no si control cabinet a anyɛ yiye koraa no IP54 ahobammɔ level wom mu;
24V DC ahoɔden a wɔde ma nnwinnade, na wɔabara 220V AC ahoɔden a wɔde di dwuma no denneennen;
Nsiesie
(1) Yɛsrɛ sɛ hwɛ daa sɛ ahobammɔ relay no ahobammɔ dwumadi no wɔ tebea pa mu, ne sɛ ebia nsɛnkyerɛnne bi wɔ hɔ a ɛkyerɛ sɛ wɔasakra ɔmansin no anaa mfitiase no anaasɛ wɔatwa ho ahyia anaa;
(2) Yɛsrɛ sɛ di ahobammɔ ho mmara a ɛfa ho no akyi na yɛ adwuma sɛnea akwankyerɛ a ɛwɔ akwankyerɛ nhoma yi mu te, anyɛ saa a ebetumi ama akwanhyia a edi awu anaasɛ adwumayɛfo ne agyapade ahwere;
(3) Wɔayɛ nneɛma no mu nhwehwɛmu a emu yɛ den na wɔahwɛ sɛnea ɛyɛ papa ansa na wɔafi adwumayɛbea hɔ. Sɛ wohu sɛ nneɛma no nnyɛ adwuma yie na wosusu sɛ module a ɛwɔ mu no adi mfomsoɔ a, yɛsrɛ wo, di ɔnanmusifoɔ a ɔbɛn wo no nkyɛn anaa di nkitaho tẽẽ ne mfiridwuma ho mmoa telefon a wɔfrɛ no 400 711 6763.
(4) Wɔ mfeɛ nsia mu firi da a wɔde maeɛ no, ɛsɛ sɛ Pinghe siesie nneɛma no yiedie ho haw nyinaa wɔ berɛ a wɔde di dwuma daa no kwa.