PHG-11ND-12 /PHG-22ND-1212 hmanga siam a ni

Analogue input signal isolators(Loop hmanga siam) a ni.

PHG-11ND-12 series hian input 1 leh output 1 a nei a
PHG-22ND-1212 series hian input 2 leh output 2 a nei a

Input: 4 ~ 20mA a ni
A chhuahna: 2 wire 4 ~ 20mA

Min rawn biak theih reng e

product chungchang chipchiar takin

Technical parameter a ni

Wiring diagram hmanga siam a ni

Certification pek a ni

Internet atanga thil lachhawng

A tlangpuiin

DC signal isolator, circuit hian signal atang hian power energy a hmu thin

output end, isolate leh convert 4~20mA current signal chu a

input tawp chu 4~20mA current signal ah two-wire interface ah a awm a

output tawp lam a ni.

He product hian independent power supply a mamawh lo va, a...

input leh output chu a inthlau hle.

Input a ni
Signal input a ni	4~20mA a ni
Output a ni
A chhuahna signal a ni	2 wire 4~20mA a ni
Signal voltage a ni	12~30VDC a ni
Load resistance a awm thei	RL≤(Ui-6)/0.02 a ni
Parameter bulpui ber berte
Output dik tak a ni	0.2%FS a ni
Chhanna hun pek hun	10ms a ni
Temperature a inthlak danglam thin	0.01%FS/°C a ni
Temperature parameter hrang hrangte	Hnathawh lumna: -20°C ~ +60°C,
Temperature parameter hrang hrangte	A dahna hmun: -40°C ~ +80°C
Relative humidity a awm lo	10%~95% RH ah chuan condensation a awm lo
Insulation chakna a ni	≥1500VAC/min (input/output) a ni thei.
Insulation a do theih loh	100MΩ (500V DC) (input/output inkar) a ni.
Electromagnetic nena inmil theihna	GB/T 18268 (IEC 61326-1) hmanga siam a ni.
MTBF	80000h a ni
Wire mamawh a ni	Cross section≥ 0.5mm2 a ni a; Insulation chakna ≥ 500V a ni
Field hmanrua hman tur	Tuna source awm mek