PHD-22TT-1 1. Di wan dɛn we de wok

TC input isol sefty barɛri

PHD-22TT-*1*1 2 input 2 autput

TC input/4 ~ 20mA autput (konfigurebl)

Kɔntakt wi

di ditel dɛn bɔt di prɔdak

Teknik paramita

Dayagram fɔ waya

Sɛtifiket fɔ di wok

Dɔŋlod

Ovaviu fɔ di tin dɛn we dɛn dɔn lan

Tεmכkכpl input ayzכlayshכn sefty barεri kin ayzכlεt εn kכnvכlt tεmכkכpl (TC) signal dεm na hazada εria dεm to 4-20mA kכrant signal dεm, εn autput dεm to di sefty zon. Dis sefty barɛri gɛt bilt-in kol jɔnkshɔn kɔmpɛnshɔn ɛn dɛn kin kɔnfigyut am wit sɛns. Di aktual rεnj fכ di tεmכkכpl kin set tru kכmpyuta softwe. I gɛt di wok dɛn we waya brok alam ɛn ɔt ɔf rɛnj alam. Dis prodak nid indipɛndɛnt pawa saplai, wit isol pawa saplai, input, ɛn ɔtput tɛminal dɛn. "*" de sho di input tayp fɔ di tɛmokɔpl, ɛn di spɛshal mɔdel de sho bay wan kɔd (luk "Input Signal Type and Range Table" fɔ di ditel dɛn).

Input signal tayp ɛn mɛzhɔmɛnt rɛnj

Kɔd	TC mɔdel	Di rεnj fɔ mɛzhɔ	Minimum rεnj	Kɔnvɔshɔn kɔrɛkt we
1. 1. 1.	K	-200 ~ 1370 ° C	50°C	0,5°C/0,1% na di .
2. 2.	S	-50 ~ 1760 ° C	500°C na di ples	1,5°C/0,1% pan di .
3. 3.	ƐN	-140 ~ 1000 ° C	50°C	0,5°C/0,1% na di .
4. 4.	J	-160 ~ 1200 ° C	50°C	0,5°C/0,1% na di .
5. 5.	B	250 ~ 1800 ° C	500°C na di ples	1,5°C/0,1% pan di .
6. 6.	T	-200 ~ 400 ° C	50°C	0,5°C/0,1% na di .
7. 7.	R	-50 ~ 1760 ° C	500°C na di ples	1,5°C/0,1% pan di .
8. 8.	N	-200 ~ 1300 ° C	50°C	0,5°C/0,1% na di .

Example: we di input na 2 input wit K-kɔpl, tempɔret rɛnj na 0 ~ 1200°C, 2 autput 4 ~ 20mA, pawa saplai 20 ~ 35VDC, den di mɔdel fɔ bi PHD-22TT-1111 (0 ~ 1200°C).

Di mɛzhɔmɛnt rɛnj kin sɛt to di spɛsifikɛd 0~1200°C rɛnj bay kɔmpyuta.

* Bus terminal pawa saplai, duya luk apɛndiks fɔ di ditel dɛn.

Input na eria we gɛt prɔblɛm
Input signal fɔ yuz	K, S, E, J, B, T, R, N tεmכkכpl signal dεm (luk "Input Signal Tayp εn Rεnj Tεbul" fכ di ditel dεm)
Input diskɔnekshɔn	Di difɔlt "lɔ alam" kin chenj to "hay alam" tru kɔnfigyushɔn sɔftwɛl
Signal rεnj	Di mεzhɔ rεnj כf di kכrεspכndεnt tεmכkכpl na -10~100mV.
Di rεnj fɔ mɛzhɔ	Di wan dɛn we de yuz am kin mek dɛn yon kɔnfigyushɔn we dɛn de ɔda, ɛn sho am na di tel nɔmba ɔ ɔda we.
Bil-in kol jɔnkshɔn kɔmpɛnshɔn	±1 ° C(Kɔmpɛns rɛnj -20 ° C ~ + 60 ° C)
Sefty sayd autput:
Signal we de kɔmɔt na di ɔtput	4 ~ 20mA we yu de
Kapasiti fɔ lod	0 ~ 500Ω(we yu kin kɔstɔmayz)
Kapasiti fɔ lod	Opshɔnal vɔlɔt ɔtput tayp, lod rɛsistɛns RL ≥ 330kΩ
LED indikɛtɔ fɔ di tin dɛn we de apin	Grin: Pawa indikɛtɔ
LED indikɛtɔ fɔ di tin dɛn we de apin	Lɔw rɛnj alam yɔlɔ layt on, ay rɛnj alam rɛd layt on
Ɔtput akkuracy	Duya luk na di "Input Signal Type and Range Table" fɔ di ditel dɛn
Di tɛm fɔ ansa	fכ rich 90% pan di fayn valyu insay 500ms
Tɛmpratura drift	0.005%FS/°C
Di paramita dɛn fɔ di tɛmpracha	Wok temperechur: -20 ° C ~ + 60 ° C, stכrej tεmprachכ:-40 ° C ~ + 80 ° C
Rilativ humiditi	10%~95% RH no kondensashɔn
Dielektrik trɛnk	Bitwin intrinsically sef sayd ɛn nɔ-intrinsically sef sayd (≥ 3000VAC/min);
Dielektrik trɛnk	bitwin pawa saplai ɛn nɔ-intrinsically sef tɛminal (≥ 1500VAC/min)
Insuleshɔn rɛsistɛns	≥100MΩ (bitwin input/ɔtput/pawa saplai)
Ilɛktromagnetik kɔmpatibiliti	Akɔdin to IEC 61326-1(GB/T 18268), IEC 61326-3-1
MTBF	100000h na di 100000h
Di tin dɛn we dɛn nid fɔ du fɔ waya	Ɔrizɔntal kɔt sɔfays ≥ 0.5mm2; Insuleshɔn trɛnk ≥ 500V
Di fil ikwipmɛnt dɛn we dɛn kin yuz	K. S, E, J, B, T, R, N TC sensor dɛn
Di ples we dɛn kin instɔl am	If dɛn instɔl am na say we sef, dɛn kin kɔnɛkt am to intrinsik sefty inschrumɛnt dɛn na say dɛn we gɛt prɔblɛm te to Zɔn 0, IIC, Zɔn 20, ɛn IIIC
Sɛtifiket fɔ sef
Fɔnishɔnal sefty sɛtifikeshɔn	SIL2 akɔdin to IEC 61508 standad dɛn
Mak we de sho se i nɔ bɔn	[Ɛks ia Ga]lIC [Ɛks ia Da]lllC
Stɛndad we nɔ de pruv fɔ ɛksplɔshɔn	GB/T3836.1-2021, di wan dɛn we de wok GB/T3836.4-2021, di wan dɛn we de wok
Tɛminal dɛn 1-2, 3-4:	Um:250V AC/DC Uo=8.4V DC Io=31mA
Tɛminal dɛn 1-2, 3-4:	Po=65.1mW Co=4.8μF Lo=20mH
Sɛtifiket bɔdi	CQST(China Nashɔnal Kwaliti Supavayshɔn ɛn Tɛst Sɛnta fɔ Ɛksplɔshɔn Protɛkt Ilɛktrik Prodakt dɛn)