Shigar da Siginar Zafin Zafi
- Tashar Jiragen Sama
- Shingayen Tsaro da Aka Keɓe
- Masu Rarraba Sigina
- Na'urorin Kariya Masu Tasowa
- Tsaron jigilar kaya
- Modules na I/O masu Hankali da Aka Raba
- Ƙofofin Wayo Masu Hankali
- Masu Canja wurin Bayanan Masana'antu
- Masu Nazarin Dew Point na Kan layi
- Sassan Samun Bayanai
- Mai canza bayanai na HART
PHG-11TZ-46
Bayani
Mai canza zafin shigar RTD zai iya aika siginar juriya ta zafi (RTD) Pt100 1:1 zuwa fitarwa don tuƙa kaya.
Wannan samfurin yana buƙatar samar da wutar lantarki mai zaman kanta, kuma ana ware samar da wutar lantarki, shigarwa da fitarwa.
| Shigarwa | |
| Siginar shigarwa | Waya biyu ko waya uku siginar Pt100 |
| Kewayon aunawa | -200℃-850℃ |
| Fitarwa: | |
| Siginar fitarwa | Siginar RTD PT100 |
| Wutar lantarki | 0.1-3mA |
| Ƙarfin wutar lantarki | 20-35VDC |
| Amfani da wutar lantarki | |
| Alamar LED | Kore: Alamar wuta |
| Daidaiton fitarwa | 0.1%FS |
| Juyawar yanayin zafi | 0.1%FS/10℃ |
| Sigogin zafin jiki | Zafin aiki: -20℃~+60℃, zafin ajiya: -40℃~+80℃ |
| Danshin da ya dace | 10% ~ 95% RH babu danshi |
| Ƙarfin Dielectric | ≥2000VAC/min (tsakanin shigarwa/fitarwa/ samar da wutar lantarki) |
| Juriyar rufi | ≥100MΩ (tsakanin shigarwa/fitarwa/ samar da wutar lantarki) |
| Dacewar na'urar lantarki | A cewar IEC 61326-1(GB/T 18268), IEC 61326-3-1 |
| MTBF | 100000h |
| Bukatun waya | Sashe na giciye ≥ 0.5mm2; Ƙarfin rufi ≥ 500V |
| Kayan aikin filin da suka dace | Wayoyi biyu ko waya uku RTD Pt100 |
Lura:
1. Aikin layin wutar lantarki aiki ne na zaɓi, kuma masu amfani suna buƙatar ƙayyade hanyar samar da wutar lantarki lokacin yin oda.
Zaɓin haɗin layin wutar lantarki zai iya komawa zuwa shafi na 89 na "Annex"
2. Lokacin shigar da wayar RTD guda uku, ya zama dole a tabbatar da cewa wayoyi uku suna da tsayi iri ɗaya gwargwadon iko
3. Lokacin shigar da RTD mai waya biyu, dole ne tashoshi 4 da 2 su kasance a takaice a kewaye
PHD-11TC-33A-23
PHG-11TZ-46