Shigarwar Analog
- Tashar Jiragen Sama
- Shingayen Tsaro da Aka Keɓe
- Masu Rarraba Sigina
- Na'urorin Kariya Masu Tasowa
- Tsaron jigilar kaya
- Modules na I/O masu Hankali da Aka Raba
- Ƙofofin Wayo Masu Hankali
- Masu Canja wurin Bayanan Masana'antu
- Masu Nazarin Dew Point na Kan layi
- Sassan Samun Bayanai
- Mai canza bayanai na HART
PHG-11TH/PHG-12TH
Bayani
Mai raba siginar shigarwar potentiometer zai iya ware kuma ya mayar da siginar potentiometer zuwa fitarwar siginar DC. Da'irar juyawa tana aika ƙarfin lantarki na 2.5V zuwa potentiometer na shigarwa, sannan potentiometer ɗin ya aika da matsin lamba na ɓangare zuwa da'irar.
Wannan samfurin ya kamata a yi shi da kansa, kuma ya kasance da ƙarfinsa,
An ware tashoshin samar da kayayyaki, shigarwa da fitarwa.
| Shigarwa | |
| Siginar shigarwa | Potentiometer mai waya uku |
| Fitarwa | |
| Siginar fitarwa | Siginar DC (halin yanzu/ƙarfin lantarki) |
| Juriyar Load | Juriyar kaya ta yanzu ≤500Ω |
| Juriyar nauyin wutar lantarki | |
| Sigogi na asali | |
| Ƙarfin wutar lantarki | 20~35V DC |
| Amfani da wutar lantarki | Fitowar yanzu |
| Fitowar yanzu | |
| Alamar LED | Kore: alamar wuta |
| Daidaiton fitarwa | ±0.1%FS |
| Lokacin amsawa | 300ms don isa 90% na ƙimar ƙarshe |
| Sigogin zafin jiki | Zafin aiki: -20℃ ~ +60℃, |
| Zafin ajiya: -40℃ ~ +80℃ | |
| Danshin da ya dace | 10% ~ 95% RH babu danshi |
| Ƙarfin rufin | ≥2000VAC/min (shigarwa/fitarwa/ƙarfin wutar lantarki) |
| Juriyar rufi | 100MΩ (500V DC) (tsakanin shigarwa/fitarwa/ samar da wutar lantarki) |
| Dacewar na'urar lantarki | GB/T 18268 (IEC 61326-1) |
| MTBF | 80000h |
| Bukatun waya | Sashen giciye ≥ 0.5mm2; Ƙarfin rufi ≥ 500V |
| Kayan aikin filin da suka dace | Potentiometer mai waya uku |
PHD-11TC-33A-23
