Shigar da zafin jiki
- Tashar Jiragen Sama
- Shingayen Tsaro da Aka Keɓe
- Masu Rarraba Sigina
- Na'urorin Kariya Masu Tasowa
- Tsaron jigilar kaya
- Modules na I/O masu Hankali da Aka Raba
- Ƙofofin Wayo Masu Hankali
- Masu Canja wurin Bayanan Masana'antu
- Masu Nazarin Dew Point na Kan layi
- Sassan Samun Bayanai
- Mai canza bayanai na HART
PHD-11TZ-46+
Bayani
Shigar da shingen tsaro na thermal mai kariya daga hayaki mai ƙarfi tare da aikin kariya daga hazo na iya aika siginar Pt100 mai waya biyu ko uku a cikin yankin mai haɗari zuwa yankin aminci 1: 1. Wannan samfurin yana buƙatar samar da wutar lantarki mai zaman kanta, tare da samar da wutar lantarki mai keɓewa, shigarwa, da tashoshin fitarwa.
| Shigarwa | |
| Siginar shigarwa | Waya biyu ko waya uku siginar Pt100 |
| Kewayon aunawa | -150℃~850℃ |
| Fitarwa: | |
| Siginar fitarwa | Siginar RTD Pt100 |
| Wutar lantarki | 0.1-3mA |
| Fasali na kariyar karuwa: | |
| Nau'in wutar lantarki mai fitarwa ln(8/20μs) | 5kA ku |
| Matsayin kariyar wutar lantarki Sama (8/20μs): | 60V (layi zuwa layi) |
| Matsayin kariyar wutar lantarki Sama (8/20μs): | 600V (layi zuwa ƙasa) |
| Dangane da ƙa'idodi | GB/T18802.21-2016(daidai da 1EC61643-21:2012) |
| Ƙarfin wutar lantarki | 20-35VDC |
| Amfani da wutar lantarki | ≤40mA (lokacin da wutar lantarki ta 24VDC) |
| Alamar LED | Kore: Alamar wuta |
| Daidaiton fitarwa | 0.1%FS |
| Juyawar yanayin zafi | 0.1%FS/10℃ |
| Sigogin zafin jiki | Zafin aiki: -20℃~+60℃, zafin ajiya: -40℃~+80℃ |
| Danshin da ya dace | 10% ~ 95% RH babu danshi |
| Ƙarfin rufin | Tsakanin ɓangaren da ke da aminci a cikin zuciya da ɓangaren da ba shi da aminci a cikin zuciya (≥3000VAC/min); tsakanin wutar lantarki da ɓangaren da ba shi da aminci a cikin zuciya (≥1500VAC/min) |
| Juriyar rufi | ≥100MΩ (tsakanin shigarwa/fitarwa/ samar da wutar lantarki) |
| Dacewar na'urar lantarki | A cewar IEC 61326-1(GB/T 18268), IEC 61326-3-1 |
| MTBF | 100000h |
| Bukatun waya | Sashe na giciye ≥ 0.5mm²; Ƙarfin rufi ≥ 500V |
| Kayan aikin filin da suka dace | Wayoyi biyu ko waya uku RTD Pt100 |
Lura:
1. Aikin layin wutar lantarki aiki ne na zaɓi, kuma masu amfani suna buƙatar ƙayyade hanyar samar da wutar lantarki lokacin yin oda.
Zaɓin haɗin layin wutar lantarki zai iya komawa zuwa shafi na 89 na "Annex"
2. Lokacin shigar da wayar RTD guda uku, ya zama dole a tabbatar da cewa wayoyi uku suna da tsayi iri ɗaya gwargwadon iko
3. Lokacin shigar da na'urar RTD mai waya biyu, dole ne a yi amfani da tashoshin shingen tsaro 4 da 2 a takaice.
PHD-11TC-33A-23
PHD-11TZ-46+