- Tashar Jiragen Sama
- Shingayen Tsaro da Aka Keɓe
- Masu Rarraba Sigina
- Na'urorin Kariya Masu Tasowa
- Tsaron jigilar kaya
- Modules na I/O masu Hankali da Aka Raba
- Ƙofofin Wayo Masu Hankali
- Masu Canja wurin Bayanan Masana'antu
- Masu Nazarin Dew Point na Kan layi
- Sassan Samun Bayanai
- Mai canza bayanai na HART
PH6005-1AR1B-F
Bayani
PH6005-1AR1B-F wani tsari ne na sarrafa jigilar kaya mai aminci wanda ya dace da warewar siginar DO da kuma canzawa a cikin tsarin SIS. Yana da lamba 1 da aka saba budewa (NO) da lamba 1 da aka saba rufewa (NC), tare da tashoshi da aka tanada don gwajin gwajin tabbatarwa ta hanyar layi cikin sauri. An riga an shigar da sashin fis ɗin da ke kan allon tare da kariyar fis ɗin 5A, wanda ke ba masu amfani damar maye gurbin fis ɗin da suka lalace cikin sauri. Da'irar ciki tana amfani da fasahar da ba ta da matsala, fasahar sake amfani da ita sau uku, da fasahar kariyar haɗakarwa.
Bayanan fasaha
| Halayen samar da wutar lantarki: | |
| Tushen wutan lantarki: | 24V DC |
| Asarar da ake samu a yanzu: | ≤60mA(24V DC) |
| Kewayon ƙarfin lantarki: | 16V ~ 35V DC |
| Sifofin shigarwa: | |
| Shigarwar wutar lantarki: | ≤60mA(24V DC) |
| Juriyar waya: | ≤ 15 Ω |
| Na'urar shigarwa: | Siginar DO mai sarrafa SIS |
| Sifofin fitarwa: | |
| Adadin lambobin sadarwa: | 1NO+1NC |
| Kayan hulɗa: | Ag-alloy |
| Kariyar fis ɗin hulɗa: | 5A (wanda za a iya maye gurbinsa) |
| Ƙarfin hulɗa: | 5A/250V AC; 5A/30V DC |
| Tsawon rayuwar injina: | fiye da sau 107 |
| Halayen lokaci: | |
| Jinkirin kunnawa: | ≤ 30ms |
| Jinkirin rage kuzari: | ≤ 30ms |
| Lokacin murmurewa: | ≤ 30ms |
| Katsewar Gajeren Lokaci: | 20ms |
| Matakin Ingancin Tsaro (SIL): | SIL3 |
| Matsakaicin Yiwuwar Kasawa Mai Haɗari Idan Aka Bukata | 1.98E-04 |
| Lokacin dubawa da gwaji | Shekaru 20 |
| Maki na Rashin Dalili na Kullum (β) | 2.5% |
| Rashin inganci(λ) | |
| Yawan gazawar tsaro (λs) | 167 E-09 1/h |
| Yawan gazawa mai haɗari | 90 E-09 1/h |
| Yawan gazawar da ba a gano ba | 90 E-09 1/h |
| Halayen Muhalli | |
| Daidaiton wutar lantarki: | EN 60947, EN 61000-6-2, EN 61000-6-4 |
| Mitar girgiza: | 10Hz~55Hz |
| Girman girgiza: | 0.35mm |
| Yanayin zafi: | -20 ℃~+60 ℃ |
| Zafin ajiya: | -40 ℃~+85 ℃ |
| Danshin da ya shafi dangi: | 10% zuwa 90% |
| Tsawon tsayi: | ≤ mita 2000 |
| Halayen rufi | |
| Tsaftace wutar lantarki da nisan da ke ratsawa: | ya yi daidai da EN 60947-1 |
| Matsayin ƙarfin lantarki mai yawa: | na uku |
| Matsayin gurɓatawa: | 2 |
| Matakin kariya: | IP20 |
| Ƙarfin rufin: | 1500V AC, minti 1 |
| Ƙwaƙwalwar rufi mai ƙima: | 250V AC |
| Ƙarfin wutar lantarki mai ƙima: | 6000V (1.2/50us) |
Girman waje
Zane-zanen Toshe-toshe na Aiki
Aikace-aikacen yau da kullun
Gwajin Shaida
Tashoshin da aka tanada na R1~R3 na iya cimma gwajin Tabbatarwa cikin sauri a layi, kuma matakan gwaji sune kamar haka:
(1) Gwada juriya tsakanin kowace tasha ta amfani da kewayon Ohm na multimeter a ƙarƙashin yanayin kunnawa da kashe wuta;
(2) Kwatanta sakamakon gwajin da teburin gaskiya, kuma idan sun yi daidai, yana nuna cewa samfurin yana aiki yadda ya kamata;
(3) idan akwai wata matsala, da fatan za a daina amfani da shi nan take kuma a tuntuɓi tallafin fasaha da wuri-wuri.
| Gefen Samar da Wutar Lantarki | Gefen Ganowa | |||
| 14-R1 | R1-R3 | R3-R2 | R2-13 | |
| Sanya ta | ≤15Ω | ≤15Ω | ≤15Ω | ≤15Ω |
| Hutu | ≤15Ω | OL | OL | OL |
Tsarin wayoyi
(1) Wayoyin kayan aikin suna amfani da tashar haɗin da za a iya haɗawa da ita;
(2) Yankin haɗin gwiwar jan ƙarfe mai laushi na wayar gefen shigarwa dole ne ya fi 0.5mm2, kuma ɓangaren fitarwa dole ne ya fi 1mm2;
(3) Tsawon wayar da aka fallasa ya kai kusan mm 8, wanda aka kulle shi da sukurori na M3;
(4) Dole ne hulɗar fitarwa ta samar da isassun hanyoyin kariya daga fis;
(5) Mai sarrafa jan ƙarfe dole ne ya jure yanayin zafi na akalla 75 ℃;
(6) Sukurin tashar na iya haifar da rashin aiki, dumama, da sauransu. Saboda haka, don Allah a matse shi bisa ga ƙayyadadden ƙarfin juyi. Ƙarfin juyi mai matsewa na tashar 0.5Nm.
Shigarwa
Ya kamata a sanya na'urorin jigilar kaya na tsaro a cikin kabad masu kula da su waɗanda ke da aƙalla matakin kariya na IP54.
An shigar da na'urorin jigilar kaya na PH6005-1AR1B-F duk da layin jagora na DIN35mm. Matakan shigarwa sune kamar haka
(1) Manne ƙarshen saman kayan aikin a kan layin jagora;
(2) Tura ƙarshen ƙasan kayan aikin zuwa cikin layin jagora.
Rushewa
Saka sukudireba (faɗin ruwan wuka ≤ 6mm) a cikin maƙallin ƙarfe a ƙasan ɓangaren kayan aiki;
Tura sukudireba sama sannan ka danna makullin ƙarfe zuwa ƙasa;
Ja ɓangaren kayan aikin sama da kuma fitar da shi daga layin jagora.
Gyara
(1) Da fatan za a riƙa duba ko aikin aminci na relay ɗin tsaro yana cikin kyakkyawan yanayi, da kuma ko akwai alamun cewa an yi wa da'irar ko asalin ko kuma an kewaye ta;
(2) Da fatan za a bi ƙa'idodin tsaro masu dacewa kuma a yi aiki bisa ga umarnin da ke cikin wannan littafin jagora, in ba haka ba zai iya haifar da haɗari masu haɗari ko asarar ma'aikata da dukiyoyi;
(3) An yi bincike mai zurfi da kuma kula da inganci kafin a bar masana'antar. Idan ka ga cewa kayayyakin ba sa aiki yadda ya kamata kuma kana zargin cewa kayan cikin na'urar sun lalace, tuntuɓi wakilin da ke kusa ko kuma ka tuntuɓi layin taimakon fasaha kai tsaye.
(4) Cikin shekaru shida daga ranar isarwa, duk wata matsala ta ingancin samfura yayin amfani da su na yau da kullun za a gyara ta Pinghe kyauta.
Hankali
Da fatan za a tabbatar ko marufin samfurin, samfurin lakabin samfur, da ƙayyadaddun bayanai sun yi daidai da kwangilar siyan;
Kafin shigarwa da amfani da na'urorin watsawa na tsaro, a hankali a karanta wannan jagorar;
Idan kuna da wasu tambayoyi, tuntuɓi Beijing Pinghe Technical Support Hotline a 400 711 6763;
Ya kamata a sanya na'urar auna tsaro a cikin kabad mai kariya aƙalla matakin kariya na IP54;
Ana amfani da wutar lantarki ta hanyar wutar lantarki ta 24V, kuma amfani da wutar lantarki ta AC ta 220V haramun ne;