Temperature Signal Input
- Terminal Board
- Makabukud a Safety Barriers
- Signal Isolators
- Surge Protective Devices
- Safety Relays
- Isolated Intelligent I/O Modules
- Intelligent Gateways
- Industrial Data Optical Transceivers
- Online Dew Point Analyzers
- Data Acquisition Modules
- HART data converter
PHG-11TZ Series
Overview
Ing RTD input temperature transmitter malyari yang mag isolate ampo mag convert keng thermal
resistor (RTD) signal keng DC signal, na gagamitan para magdrive keng load.
Ing intelligent configuration malyari ya, at ing tutuking range ning thermal
ing resistance malyari yang i-set kapamilatan ning computer software. Atin yang obra
ning disconnection alarm ampo out-of-range alarm function.
Ing produktung ini kailangan yang magsarili, at ing suplay ning kuryenti,
ing input ampo output terminals makabukud la.
| Input | |
| Input signal | Adwa o atlung kawad a thermistor signals (lawen ya ing "Input Signal Type and Range Table" para kareng detalye) |
| Input disconnection | Ing default a "low alarm" malyari yang i-modify keng "high alarm" kapamilatan ning configuration software |
| Signal range | Ing katumbas a sukad ning thermal resistance |
| Sukat ning sukad | Deng gagamit gagawan da ing karelang sariling configuration neng mag-order la, at ipabalu da iti keng tail number o aliwa pa. |
| Excitation current | 800μA |
| Output: | |
| Output signal | DC signal (current/voltage) |
| Kapasidad ning karga | Current load resistance ≤500Ω (malyari yang i-customize) Voltage load resistance |
| Basic parameters: | |
| Supply voltage | 20-35VDC |
| Pamangamit king kuryenti | Kasalukuyan a output |
| LED indicator | Green: Power indicator Low range alarm L1 light on, high range alarm L2 light on |
| Katuliran ning pamaglual | Paki-refer me ing "Input Signal Type and Range Table" para kareng detalye |
| oras ning pakibat | miras keng 90% ning tauling ulaga kilub ning 300ms |
| Ing pamagbayu ning temperatura | 0.005%FS/°C |
| Parameters ning temperatura | Temperatura ning obra: -20°C~+60°C, temperatura ning pamitipun:-40°C~+80°C |
| Relatibung humidity | 10%~95% RH alang condensation |
| Dielectric strength | ≥2000VAC/min (pilatan ning input/output/power supply) |
| Insulation resistance | 100MΩ(500VDC )(pilatan ning input/output/power supply) |
| Electromagnetic compatibility | GB/T 18268(IEC 61326-1) |
| MTBF | 800000h |
| kailangan ing kawad | Horizontal cutting surface ≥ 0.5mm2; Insulation strength ≥ 500V |
| Applicable field equipments | Adwang kawad o atlung kawad thermistor G53, Cu50, Pt100, Pt1000, Ni1000 |
Kasurat:
1. PHG-11TZ - * 1+ ali ya kayabe ing output part 2
2. Ing power rail function metung yang optional a function, at kailangan dang i-specify deng gagamit ing paralan ning power supply nung mag-order la
Ing pamili kareng power rail connectors malyari yang akit keng page 89 ning "Annex"
3. Potang mag input kang atlung kawad RTD, kailangan siguraduan na parehu la kaba deng atlung kawad anggang malyari
4. Potang mag input kang two-wire RTD, kailangan lang ma short circuit deng safety barrier terminals 4 ampo 2
| Input signal type ampo range table | ||||
| Code | RTD model | Sukat ning sukad | Minimum range | Katutuan ning pamagbayu |
| 1 | G53 | -50～150°C | 20°C | 0.2°C/0.1% |
| 2 | Cu50 | -50～150°C | 20°C | 0.2°C/0.1% |
| 4 | Pt100 | -200～850°C | 20°C | 0.2°C/0.1% |
| 6 | Pt1000 | -200～850°C | 20°C | 0.2°C/0.1% |
| 7 | Ni1000 | -60～250°C | 20°C | 0.2°C/0.1% |
Alimbawa: metung a input ampo metung a output, thermal resistor Pt100 input, 4~20mA output,
24V power supply, model PHG-11TZ-41
PHD-11TC-33A-23
