Ntinye nrịbama okpomọkụ
- bọọdụ ọdụ
- Ihe mgbochi nchekwa dịpụrụ adịpụ
- Ndị na-ekewapụta mgbaàmà
- Ngwa Nchekwa Surge
- Relays nchekwa
- Modul I/O nwere ọgụgụ isi dịpụrụ adịpụ
- Ọnụ ụzọ ámá nwere ọgụgụ isi
- Ndị ntụgharị ngwa anya Data Industrial
- Ndị nyocha Dew Point dị n'ịntanetị
- Modul nweta data
- Ihe ntụgharị data HART
Usoro PHG-11TZ
Nchịkọta
Ihe ntinye okpomọkụ RTD nwere ike kewapụ ma gbanwee thermal
mgbama resistor (RTD) n'ime akara DC, nke a na-eji ebu ibu.
Nhazi ọgụgụ isi ga-ekwe omume, yana oke ọkụ nke thermal
enwere ike ịtọ nguzogide site na ngwanrọ kọmputa. Ọ nwere ọrụ
nke mkpu nkwụsịtụ na ọrụ mkpu na-anọghị nso.
Ngwaahịa a kwesịrị ka agbanye ya n'onwe ya, yana ọkụ,
ọnụ ụzọ ntinye na mmepụta dịpụrụ adịpụ.
| Ntinye | |
| Mgbama ntinye | Waya abụọ ma ọ bụ atọ waya thermistor mgbama (lee "Ụdị mgbama ntinye na oke tebụl" maka nkọwa) |
| Ịkwụsị ntinye | Enwere ike gbanwee "Oti mkpu dị ala" ndabara ka ọ bụrụ "oke mkpu" site na ngwanrọ nhazi |
| Oke mgbaama | Oke nha nha nha nke nguzogide okpomọkụ |
| Oke nha | Ndị ọrụ na-eme nhazi nke ha mgbe ha na-enye iwu, ma gosi ya na nọmba ọdụ ma ọ bụ ihe ọzọ. |
| Ihe mkpali ugbu a | 800μA |
| Mpụta: | |
| Mgbama mmepụta | Mgbama DC (ugbu a/voltaji) |
| Ikike ibu | Nguzogide ibu ugbu a ≤500Ω (nwere ike ịhazi ya) Voltage load resistance |
| Ntọala ntọala: | |
| voltaji ọkọnọ | 20-35VDC |
| Oriri ike | Mmepụta dị ugbu a |
| Ihe ngosi LED | Akwụkwọ ndụ akwụkwọ ndụ: Ngosipụta ike Oti mkpu L1 dị ala, ọkụ nso nso dị elu L2 ọkụ |
| Ntinye izizi | Biko rụtụ aka na "ụdị mgbama ntinye na tebụl dị nso" maka nkọwa |
| Oge nzaghachi | Na-eru 90% nke uru ikpeazụ n'ime 300ms |
| Okpomọkụ ịkpafu | 0.005% FS/℃ |
| Oke okpomọkụ | Na-arụ ọrụ okpomọkụ: -20 ℃ ~ + 60 ℃, nchekwa okpomọkụ: -40 ℃ ~ + 80 ℃ |
| Iru mmiri dị ala | 10% ~ 95% RH enweghị condensation |
| Ike dielectric | ≥2000VAC / min (n'etiti ntinye / mmepụta / ike ọkọnọ) |
| Nguzogide mkpuchi | 100MΩ(500VDC)(n'etiti ntinye / mmepụta / ike ọkọnọ) |
| Ndakọrịta elektrọnik | GB/T 18268(IEC 61326-1) |
| MTBF | 800000h |
| Achọrọ waya | N'elu ikpo ọkụ kwụ ọtọ ≥ 0.5mm2; Ike mkpuchi ≥ 500V |
| Ngwá ọrụ ubi dị mkpa | Waya abụọ ma ọ bụ atọ waya thermistors G53, Cu50, Pt100, Pt1000, Ni1000 |
Mara:
1. PHG-11TZ - * 1+ anaghị agụnye mmepụta akụkụ 2
2. Ọrụ ụgbọ oloko ike bụ ọrụ nhọrọ, ndị ọrụ kwesịrị ịkọwapụta usoro ọkọnọ ike mgbe ị na-enye iwu.
Nhọrọ nke njikọ ụgbọ oloko ọkụ nwere ike ịtu aka na ibe 89 nke "Annex"
3. Mgbe ị na-etinye eriri RTD atọ, ọ dị mkpa iji hụ na eriri atọ ahụ hà nhata dịka o kwere mee.
4. Mgbe ị na-etinye RTD nwere waya abụọ, ebe nchekwa ihe mgbochi 4 na 2 ga-adị mkpụmkpụ okirikiri.
| Ụdị mgbama ntinye na tebụl nso | ||||
| Koodu | Ụdị RTD | Oke nha | Oke kacha nta | Ntughari ziri ezi |
| 1 | G53 | -50 ~ 150 ℃ | 20 ℃ | 0.2 ℃/0.1% |
| 2 | Ku50 | -50 ~ 150 ℃ | 20 ℃ | 0.2 ℃/0.1% |
| 4 | Pt100 | -200 ~ 850 ℃ | 20 ℃ | 0.2 ℃/0.1% |
| 6 | Pt1000 | -200 ~ 850 ℃ | 20 ℃ | 0.2 ℃/0.1% |
| 7 | Ni1000 | -60 ~ 250 ℃ | 20 ℃ | 0.2 ℃/0.1% |
Ka ihe atụ: otu ntinye na otu mmepụta, thermal resistor Pt100 ntinye, 4 ~ 20mA mmepụta,
24V ike ọkọnọ, nlereanya PHG-11TZ-41
PHD-11TC-33A-23
