Pri̱kuɛnthi̱ Input
- Terminal Bɔɔd
- Ai̱thölɛted Thɛpti̱ Barriɛri̱
- Thi̱knal Ai̱thölɛtɔri̱
- Thärji̱ Prötɛktib Di̱bai̱thni̱
- Rilɛyni̱ tin gaŋkɛ naath
- Ai̱thölɛted Intɛlli̱jɛn I/O Moduuli̱
- Intɛlijɛn Gatewɛyni̱
- Inda̱thti̱rial Data Optikal Tra̱ni̱ththi̱bɛri̱
- Intɛrnɛtdä Dew Puɔɔny Anali̱dhɛri̱
- Data Akui̱thi̱cin Moduuli̱
- HART data kɔnbɛrtɛr
PHD-22TP-1313/PHD-22TP-2323
Oberbiew
Kä prekuɛnci̱ thi̱knal ɛ mi̱ ca la̱th rɛy ai̱thölɛt thɛpti̱ bariɛr, min bi̱ ŋäcdɛ ɛn 1: 1 tra̱ni̱thmi̱ciɔn duŋ prekuɛnthi̱ thi̱knal duŋ ini̱thtrumɛn rɛy bɛc gua̱a̱th ɛ wä kä gua̱a̱th in gɔaa, kä ŋun buɔ̱m in ca la̱th go̱lä tha̱plaay (12V kiɛ 24V) kɛ kui̱ pi̱e̱li̱ ini̱thtrumɛn rɛy bɛc gua̱th.
Ɛn kuak ɛmɛ go̱o̱rɛ ɣöö bɛ tä kɛ pawɛr mi̱ cuŋ kärɔa, kä ɛn pawɛr tha̱plaay, input kɛnɛ output kɛn tekɛ dääk kamnikiɛn.
| Input rɛy gua̱th mi̱ bɛc bɛc | |
| Input thi̱knal | Pri̱kuɛnthi̱ ≤ 100kHz, ampli̱ti̱öd ≤ 12V, yuuti thärkäl ≥ 20%, lɛbel-in di̱i̱t ≥ 4V, lɛbel-in tɔt ≤ 1V (PHD-22TP-1313) Pri̱kuɛnthi̱ ≤ 100kHz, ampli̱ti̱öd2V2, lɛbel-in di̱i̱t ≥ 4V, lɛbel-in kuiy ≤ 1V (PHD-22TP-2323) |
| Di̱thti̱ri̱buciɔn böltɛj | Tharki̱o̱t mi̱ ca lɛp ≤ 13V, böltɛj in ca da̱a̱k ≥ 8.5V mi̱ ca thi̱ääŋ kɛ 25mA (PHD-22TP-1313) |
| Ɣɔpɛn thärki̱o̱t bɔltɛj ≤ 25V, di̱thti̱ri̱buciɔn böltɛj ≥ 16V mi̱ ca thi̱ääŋ kɛ 25mA (PHD-22TP-2323) | |
| Kä ga̱ŋ kui̱c in bä raar: | |
| Kä min bä raar kä thi̱knal | Prɛkuɛnci̱ 1: 1 min bä raar |
| Thi̱knal rɛŋ | Thi̱knal mi̱ tɔt-lɛbel ≤ 0.5V |
| Thi̱knal lɛbel mi̱ di̱i̱t≥10V(PHD-22TP-1313) | |
| Thi̱knal mi̱ di̱i̱t kä lɛbel≥20V(PHD-22TP-2323) | |
| Drive kärɛnt | ≤ 15mA, min gaŋ kuak ≥ 1k Ω |
| Thɔ̱plai̱ böltɛj | 20-35VDC |
| Kä min naŋkɛ buɔ̱m | Mi̱ ca buɔ̱mdɛ la̱th kä 24VDC kɛnɛ min bä raar kä 12V lɛbel |
| ≤80mA(PHD-22TP-1313) | |
| ≤ 100mA(PHD-22TP-2323) | |
| LED indi̱kɛtɔr | Green: Nyuuth buɔ̱m |
| Käpdɛ kɛnɛ ja̱kdɛ kɛ thaak gër | ≥20ms |
| Tɛmpi̱rɛciɛr parami̱ti̱ri̱ | Tɛmpi̱rɛciɛr la̱tdɛ: -20°C~+60°C |
| lëth gua̱th tɔ̱wä:-40°C~+80°C | |
| Relɛtib ɣɔmi̱di̱ti̱ | 10%~95% RH thiɛlɛ kɔndɛnthecin |
| Dielektrik buɔ̱mdɛ | Kam intrinthi̱kali̱ thɛp kui̱c kɛnɛ nɔ̱n-intrinthi̱kal thɛp kui̱c (≥ 3000VAC/min); |
| kam pawɛr tha̱plaay kɛnɛ nɔ̱n-intri̱nthi̱kalli̱ thɛp termi̱nal (≥ 1500VAC/min) | |
| Inthulɛciɔn redhi̱tan | ≥100MΩ (kam min wä rɛydɛ/min bä raar/pawɛr tha̱plaay) |
| Ɛlɛktrömagnɛtik kɔmpatibili̱ti̱ | Kä min ca lar ɛ IEC 61326-1(GB/T 18268), IEC 61326-3-1. |
| MTBF | 100000h |
| Wire tin görkɛ | Kä tha̱a̱ŋdɛ min ca gɔ̱k ≥ 0.5mm2; Inthulɛciɔn buɔ̱mdɛ ≥ 500V |
| Kä kuak pi̱e̱li̱ tin lät | Kuak thëm kä prekuɛnthi̱ |
| Gua̱a̱th inthtɔlaciɔn | Mi̱ ca la̱th rɛy gua̱th mi̱ ca gaŋ, jɛn ba mat kɛɛ intrinthik ini̱thtrumɛni̱ tin gaŋkɛ naath rɛy gua̱thni̱ tin tekɛ riɛk ɛ wä kä Dhɔɔn 0, IIC, Dhɔɔn 20, kɛnɛ IIIC |
| Thärti̱pi̱këcin thɛpti̱ | |
| Ɛkplöciɔn prup mark | [Ɛkdh ia Ga]lic [Ɛkdh ia Da]lllC |
| Ɛkplöciɔn-pruup i̱thtandar | GB/T3836.1-2021 GB/T3836.4-2021 |
| PHD-22TP-1313 | |
| Termi̱nali̱ 1-3、4-6. | Um:250V AC/DC Uo=14.7V DC Io=207mA |
| Pö=0.76W Kɔ=0.5μF Lö=0.56mH | |
| Termi̱nali̱ 2-3、5-6. | Um:250V AC/DC Uo=8V DC Io=2.5mA |
| Pö=5mW Kɔ=5.9μF Lö=100mH | |
| PHD-22TP-2323 | |
| Termi̱nali̱ 1-3、4-6. | Um:250V AC/DC Uo=28V DC Io=93mA |
| Pö=0.65W Kɔ=0.05μF Lö=2.4mH | |
| Terminali̱ 2-3、5-6. | Um:250V AC/DC Uo=8V DC Io=2.5mA |
| Pö=5mW Kɔ=5.9μF Lö=100mH | |
| Buɔ̱n thärti̱pi̱këciɔn | CQST(Caina Naciɔnal Kuali̱ti̱ Thuperbi̱ciɔn kɛnɛ Tɛth Thäntɛr kɛ kui̱ Ɛkplöciɔn Prötɛktid Elɛkti̱rik Pröda̱kni̱) |
pd-22tp-1313-pd-22tp-2323
